Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Bells/Noise Makers

$46.49
- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting
$39.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g
$39.95
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g
$28.39
- Uses one 9v battery (not included) - Fits most handlebars
$28.00
Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty
$28.00
Coming in hot! This limited edition King of Ding II is laser-engraved "COMING IN HOT." Perfect for speed demons, messengers, cat6 champions, and anyone else who "can't stop, don't want to." The bell is made of solid brass and comes equipped with a brass striker for a loud clear ring that's sure to clear the path. The alloy mount is easy to install and fits 22.2 – 25.4mm handlebars.
$25.00
Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars
$24.99
- Stylish bike accessory for your bike through beautiful bohemian print. - Makes a resounding ding dong sound.
$24.99
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell Classic. This bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
$24.95
Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.
$21.00
Our Trail Bell announces your presence while letting you keep both hands firmly on your grips and goes silent with just the flick of a switch. Fits all handlebars from 22.2 to 31.8mm.
$19.99
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$19.95
Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.
$19.00
Available with either polished brass or chrome plated dome. Striker can be adjusted for individual comfort. - Dome Diameter: 45mm (1.7") - Fits handlebars with 22mm – 25.4mm (.86" – 1") outside diameters
$16.59 - $18.39
Origin-8's Ping Multi-Fit features a compact design and a multi-fit, no-tool mount.
$18.19
Origin-8's Time Clock Bell provides a wonderful sound and adds a touch of class to your handlebars. This great 55mm bell delivers the wonderful resonate sound of brass with all-metal mechanical parts.
$17.99
•Great novelty Horn / Bell combination •Combination of Ringer bell and Squeeze horn •Fits most handlebars
$17.49
Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.
$15.79
•Parrot Pirate •Fits most handlebars •Easy installation
$15.79
- Great novelty horn - Fits most handlebars
$15.39
•Combines Ping bells and streamers •One bell on each end of the handlebar •Mounts inside handlebar under grips •Optional hand held use
$15.39
- 65mm Bell in the form of a bacon cheese burger - Adjustable handlebar mount - Universal nylon mount - Ringer style mechanism - Function: Lever
$15.39
Let everyone know your coming with Sunlite's Windmill Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed. And perhaps best of all, for added flair the windmill spins as you ride through the wind!
$15.00
Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)
$15.00
Keep valuable handlebar space free with Mirrycle's Incredibell Striker Bell. It integrates into the top cap of the headset, can be mounted any way you choose, and features an adjustable dinger as well. A flick of your finger and the Striker Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1") - Weight: Black and silver: 36g (1.3oz); Brass: 68g (2.4oz)
$14.99
Dimension Bugle Horns are perfect for those who want to add a touch of humor to their bike. - 7.5 inches in length
$14.99
Dimension Bulb Horns offer classic style and personality. - 9 inches in Length
$14.99
Let other cyclists and pedestrians know you're there by ringing your Planet Bike Courtesy Bell. This minimal bell has a striker that rotates 360 degrees so you can place it wherever you need it for easy access. And it fits on handlebars with diameters from 22.3 to 26mm.
$14.59
Powder-coated black brass bell that produces a loud, clear, and pleasant sound to alert pedestrians. - Split clamp allows the bell to be installed anywhere on the handlebar without removing grips or shifters. - Fits 22.2 to 28.6mm handlebars - Size: 35mm - Material: Brass
$13.00 - $14.50
A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters
Page 1 of 3 Next page