Adults

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

The MET Parachute MCR is MET's convertible full-face helmet developed for enduro, all-mountain and e-MTB riding. Parachute MCR is designed to be truly two helmets in one. The full-face has a stylish and aggressive look providing all-round protection, while the open face reflects the style of MET's all-mountain helmets. MCR stands for Magnetic Chinbar Release and instantly converts from full to open face helmet and back. MCR is MET's revolutionary system created in partnership with Fidlock. Featuring the MIPS brain protection system and complying with ASTM 1952-15/2032-15 (shell and chinbar), riders have the highest level of protection from linear and rotational impacts. In addition, MET's unique flexible injected visor to avoid extra rotation of the neck in case of a crash. The BOA FS1 offers incremental adjustment forward and backward to deliver a precise and adaptable fit, while the belt runs 360° around the head to avoid any pressure points, optimizing comfort. It also offers 3 positions for vertical adjustment. 21 vents and the MET engineered internal air channeling work in synergy with the breathable chinbar to maximize the airflow at low and high speed. The chinbar is engineered to reach the optimal balance of stiffness and energy dissipation to give riders confidence when wearing the Parachute MCR. - In-mold polycarbonate shell with EPS liner - MCR Magnetic Chinbar Release System allows the helmet to easily convert from a full face to open face design - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - ASTM 1952-15/2032-15 certified shell and chinbar provides additional safety - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Breathable chinbar is covered with a durable injected PU foam - Removable cheek-pads (2 sizes included) allow you to achieve the perfect fit - BOA-FS1 Fit System with 360° head belt and vertical adjustments offer a customized fit - Fidlock Magnetic Buckle makes it easier to secure the helmet - 21 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications: CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

The MET Trenta 3K Carbon Mips® is a high performance road helmet designed with elite cyclists and worn to victory at Le Tour de France and the monuments of Liège-Bastogne-Liège and Il Lombardia. Engineered to keep your head fresh and save you energy with every pedal stroke, the MET Trenta 3K Carbon Mips® is the most advanced road cycling helmet we have ever made, now upgraded with the addition of Mips AIR®, the lightest and most advanced rotational management system.

Whether you're racing, getting laps at the bike park or hitting your local trails the Project 23 Carbon will keep you protected and comfortable. The carbon fiber shell offers shock absorbency and incredible value for money while the 23 big bore vents for no compromise air flow will keep you cool. Best of all, the Project 23 Carbon uses our S.E.R.T (Seven Energy Reduction Technology) slip plane system. - S.E.R.T system reduces impacts causing C.T.E - The most ventilated full-face hardshell helmet on the market - Carbon shell using our Project lab layering process to reduce weight as much as possible - Easy position visor angle no bolts needed - Injection molded branded trim to protect carbon helmet shell - AGION anti-microbial liner helps to keep things smelling fresh - TF (Through Flow) Goggle ventilation allows full air flow - Quick-release liner for easy washing and cleaning - Supplied with padded pro helmet bag - Meets CE, CPSC, AS, ASTM F1952-15 standards - Sizes XS, S, M, L, XL, XXL (size large weight 922g)

DESIGNED TO BE FAST, AND COOL! The Wasp Air Tri is a shorter version of the original Wasp helmet, designed to meet the needs of triathlon riders. Everything about the helmet is shaped around the rider’s position and finding the maximum aerodynamic gains while being ventilated. The aerodynamic performance of the Wasp Air is the result of extensive wind tunnels research, scientific insight in aerodynamics and the use of mathematical models that allow Lazer to compute and optimize the shape of the helmet in the virtual environment. On top of the helmet, there is an Aquaport that allows water to be squirted in the helmet, where it quickly and effectively cools the head. Besides the Aquaport the helmet also has a frontal ventilation grid to draw air into the helmet. The integrated lens is also an integral part of the helmet and can be moved forward so that air can flow into the helmet when needed. This creates an airflow through the helmet with air passing over the rider’s head and out the two tail vents. A trip wire on the top of the surface of the Wasp creates micro vortices to assure for a smooth airflow over the tail of the helmet. The Lazer advanced Turnfit retention system makes sure the helmet is snug and comfortable on the head. - Superior aerodynamic performance - Water cooling system - Panoramic lens - Adjustable lens - Advanced Turnfit system - Closed Aquavent - Lazer LifeBEAM compatible - Lazer Inclination Sensor compatible - Fit System: ATS Advanced Turnfit System - Construction: In-Mold - Ventilation: 3 Vents + Aquavent - Weight: 375g (S) - Certification: CE-CPSC-AS

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

Engineered for speed and elevated performance. At 29% lighter, 2.3% more aerodynamic, and providing 5.4% better cooling and ventilation than its predecessor Lazer Bullet 2.0, the Vento KinetiCore packs superior comfort and performance-driven features for those seeking more than just marginal gains. KinetiCore by Lazer is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built better by design. Integrated right into the helmet instead of added on after, KinetiCore delivers next-level protection in addition to weight reduction and increased ventilation. The highly breathable Vento KinetiCore is designed in sprint position at a 15-degree angle to maximize aerodynamic performance and features an advanced ventilation system to facilitate cooling — pushing you to go further with a helmet that works as hard as you do. The easy fit ScrollSys belt tailors the helmet to your head in seconds, while the convenient silicone docking system keeps eyewear secure when not in use. Compatibility with the Universal Lazer LED light ensures you're visible under any light or weather conditions. This helmet scores an esteemed "Best Available" 5-star protection rating from Virginia Tech. - WEIGHT: 290g (size medium) - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: ScrollSys - VENTILATION: 13 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC - ACCESSORIES: Optional Universal LED Features: Built for Speed Designed in sprint position at a 15-degree angle with a reduced frontal surface for superior aerodynamic performance. Eyewear Docking Silicone Keep your eyewear secure and out of your line of vision when not in use by tucking it into the vent docking system. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED at the back of the helmet and stay seen no matter what the light or weather conditions are. Precise Fit Refine your perfect fit with the easy to use ScrollSys belt for quick adjustment on the fly. The floating front headband increases airflow and eliminates pressure points, so you can focus on the ride ahead, not on adjusting your gear. Work Hard, Stay Cool Venturi advanced ventilation system draws cool air in and expels hot air through the rear of the helmet to help cool you down when you're breaking a sweat. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Lightweight Design Built 29% lighter and with 90g less plastic than the Lazer Bullet 2.0 MIPS, its streamlined design is built more sustainably with a reduced carbon footprint while sparing no expense in performance.

The MET Manta MIPS defines the MET aesthetic with its highly contemporary design and aerodynamic engineering. Featuring the MIPS-C2 rotational management system, the MET Manta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add at least 10% extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The Fidlock magnetic buckle makes it easier and faster to fasten the helmet. Despite being primarily an aero helmet it is also well ventilated. We've engineered the internal shape to channel the air, while MET's signature NACA Vent works in synergy with the specially positioned exhaust ensuring a constant airflow through the helmet, without catching the wind and creating drag. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - Fidlock Magnetic Buckle makes it easier to secure the helmet - 15 vents are internally engineered with an air channeling system to improve ventilation and comfort - Sunglasses ports securely dock sunglasses when climbing or resting - Tube-shaped tail to improve aerodynamics - Reflective rear stickers - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

The MET Trenta MIPS a performance road helmet engineered to maximize ventilation and save you energy with every pedal stroke. Featuring the MIPS-C2 rotational management system, the MET Trenta MIPS is able to slide in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. Scientifically designed air vents harness the power of the Venturi effect, pushing out warm air within the helmet through specially positioned exhausts to ensure constant airflow. The tail of the helmet also features an aerodynamic design to effectively drive airflow. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Orbital Fit System - 360° head belt, and vertical and occipital adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - 19 vents and an internal air channeling system are engineered to improve ventilation and comfort - Sunglass ports securely dock sunglasses when climbing or resting - Tube-shaped tail improves aerodynamics - Limited contact with the surface of the head helps to maximize the ventilation - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

If you push the limits of downhill speed and big air, the S-Works Dissident with ANGi is for you. That's because it's the lightest, most-ventilated, and technically advanced carbon fiber full-face mountain bike helmet out there. To help make sure of it, our 3D sculpted cheekpads and 4th Dimension Cooling System keeps things airy in the heat, while the Carbon Matrix shell keeps it light enough for all-day comfort. Our new ANGi Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. - Engineered to protect World Cup downhill and gravity riders - Meets the ASTM DH safety testing standards for impact protection and chin bar performance - Lightweight Carbon Matrix shell-target weight 1000g - 3D-sculpted cheek pads and updated crown pad design for improved ventilation and a more comfortable secure fit - 4th Dimension Cooling System and ventilation provides superior comfort - Magnetic chin strap buckle improves comfort and allows for easy, one-handed use - Helmet EJECT system compatible - Leatt brace compatible - Speaker compatible - Includes a padded travel bag with micro-fleece liner and external goggle pocket - Removable washable liner and cheek pads - MIPS-equipped - Integrated ANGi crash sensor

The premier Composite Downhill MTB Helmet from 100% has landed. The Aircraft is precision engineered with a Fiberglass Composite shell, providing a very strong, yet lightweight design. 25 enhanced venting channels create the Active Cooling System, specifically designed to manage airflow and ventilate the entire helmet. - Lightweight Design: featuring a Fiberglass Composite shell - Active Cooling System: maximizes airflow with a staggering 25 ventilation ports - Antimicrobial, washable, and replaceable comfort liner, cheek pads and chin strap cover - Emergency Release Cheek Pads for quick, safe removal - Integrated Compartment accepts inflatable emergency release systems - Compatible with most popular neck brace systems - Steel D-Ring buckle provides a secure fit while limiting weight - Perfect Fit: Engineered with 2 Shell sizes and 3 EPS Sizes and 4 cheek pad options - Adjustable Visor with machined lightweight aluminum screws - Small = 55-56cm - Medium = 57-58cm - Large = 59-60cm - X-Large = 61-62cm

Safety and awesome don't usually come in the same package, but the Matrix does just that. 77 super-bright LEDs in the back to help you stand out on the road with some personality to boot. Ride lit, trailblazer! - Super bright animated lighting - Animated turn signals - Customizable and updatable (Via app) - Impact Protection System: MIPS Sizing: - One Size: 56 – 61cm

- Lightweight fiberglass shell - 23 Large freeflow vents with internal channels for maximum cooling. - Energy absorbsion and slip plane technology - Crash release visor system - Easy position visor, no bolts needed - Quick release liner for easy washing - Agion Bluesign approved antimicrobial treatment - Fidlock magnetic closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large: 59 – 60cm - X-Large: 61 – 62cm - XX-Large: 63 – 64cm

Whether you're racing, lapping a bike park, or hitting your local trails, the Project.23 Glass Fibre will keep you protected and comfortable. The Fiberglass shell offers shock absorbency and incredible value for money while the 23 big bore vents for no compromise airflow will keep you cool. Best of all, the Project.23 Glass Fibre uses our S.E.R.T (Seven Energy Reduction Technology) slip-plane system. - 23 big bore vents for no compromise airflow - S.E.R.T system reduces impacts causing C.T.E - The most ventilated full face hardshell helmet on the market - Fiberglass shell offering shock absorbency and incredible value for the money - CRV (Crash Release Visor) system allows the visor to release on impact to help reduce rotational forces - Easy position visor angle no bolts needed - Injection-molded branded trim to protect fiberglass helmet shell - AGION anti-microbial liner helps to keep things smelling fresh - TF (Through Flow) Goggle ventilation allows full airflow - Quick-release liner for easy washing and cleaning - Supplied with P.23 custom drawstring bag - Fidlock magnetic closure - Meets CE, CPSC, AS, ASTM F1952-15 standards - Sizes XS, S, M, L, XL, XXL (size large weight 1010g)

AERODYNAMICS REDEFINED The GameChanger sets new standards. What is a cyclist's biggest enemy? Air resistance. Every cyclist knows that battling against the wind is one of the toughest challenges they face. With its Multi Position Design, the GameChanger redefines aerodynamics. The special shape reduces windage by minimizing exposed surfaces, regardless of weather conditions, head-tilt position and inflow angle. Our innovative Forced Air Cooling Technology sucks in incoming air and channels airflow around the head, creating a perfect climate and keeping your head cool even in hot races. - Multi Position Design: For optimal aerodynamics regardless of head tilt - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - FlowStraps: Aerodynamic, flutter-free and skin-friendly thanks to specially developed strap profile - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - AirPort: Aerodynamic glasses holder with strap guide - Multi Shell In Mold: For safe shock absorption - Ponytail compatibility: Helmet well suited to plait wearers

The GameChanger sets new standards. What is a cyclist's biggest enemy? Air resistance. Every cyclist knows that battling against the wind is one of the toughest challenges they face. With its Multi Position Design, the GameChanger redefines aerodynamics. The special shape reduces air resistance by minimizing exposed surfaces regardless of weather conditions, head-tilt position, and inflow angle. Our innovative Forced Air Cooling Technology sucks in incoming air and channels airflow around the head, creating a perfect climate and keeping your head cool, even in hot races. - Multi Position Design: For optimal aerodynamics regardless of head tilt - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - FlowStraps: Aerodynamic, flutter-free, and skin-friendly thanks to specially developed strap profile - Zoom Ace: Finely adjustable adjustment system with handy adjustment wheel for customizable fit - AirPort: Aerodynamic glasses holder with strap guide - Multi Shell In Mold: For safe shock absorption - Ponytail compatibility: Helmet well suited to plait wearers Sizing: - Small: 51 – 55cm - Medium: 52 – 58cm - Large: 59 – 62cm

Weighing in at 235 grams, the G1 MIPS is the lightest helmet we have ever made. It is the climbers’ favorite on the ProTour. Not only is it a featherweight, but it’s extremely well ventilated. Twenty-two vents and internal air channels create 8% more airflow over the head than wearing no helmet at all. It’s also comfortable—vital for long days in the saddle. The Super Lightweight ARS Fit System ensures a snug and comfortable fit with no pressure points. The head basket is adjustable. Two sets of pads are included so you can choose between superlight and comfort pads. Awarded the esteemed Virginia Tech 5-Star “Best Available” protection rating, you can trust that the G1 MIPS is a great choice. The MIPS system helps reduce the risk of rotational injury. When you’re after every bit of speed, the addition of the Aeroshell (sold separately) transforms the G1 MIPS into an aero helmet. - Lightweight - Well ventilated (22 vents) - Advanced Rollsys system - Comes with race and comfort pads - Lazer Aeroshell compatible (sold separately) - UCI World Tour helmet - MIPS layer - Construction: In-Mold, EPS foam, polycarbonate, nylon - Weight: 235g - Certification: CPSC

Safety and awesome don't usually come in the same package, but the Matrix does just that. 77 super-bright LEDs in the back to help you stand out on the road with some personality to boot. Ride lit, trailblazer! - Super bright animated lighting - Animated turn signals - Customizable and updatable (Via app) Sizing: - One Size: 56 – 61cm

Understated design, uncompromising power. Concentrated brightness in a distinct triangular shape that stands out on the road. Bright, slick animations when you need it, or just a regular helmet when you don't. The humble superhero's choice. - Super bright rear lighting - Articulated turn signals - Fully customizable flashing patterns - MIPS Version

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

The MET Roam MIPS is designed for all-mountain and enduro riding. The back of the head and the temples are especially in need of protection from impact, so we’ve increased the coverage around these key areas, without sacrificing the helmet’s light weight. The injection-molded visor is flexible to adapt to the shell of the helmet in a crash. This unique feature helps to manage extra rotational forces transferred to your neck. There are clips on the visor and a rear edge, which keep goggle straps in place during the ride, achieving ultimate compatibility with your eyewear. Featuring the MIPS-C2 rotational management system, the Roam is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The MIPS-C2 solution separates the shell and the liner with a thin plastic Low Friction Layer (LFL). The Roam Mips features 22 vents that work together with the purpose-built internal channel to provide optimal airflow at high and low speed. The MET Roam has also been rewarded for its comfortable fit. The inner padding has an extended surface area which provides the perfect stability without disturbing internal airflow. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - Exceptionally comfortable and secure on the head thanks to a refined internal shape and stabilizing inner padding - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Orbital Fit System - The 360° head belt with vertical and occipital adjustments help to maximize adjustability - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Integrated goggle strap clips and sunglass ports to securely dock eyewear when climbing or resting - 22 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 62cm

Think about your current helmet; now imagine it lighter, with a more comfortable fit system, better ventilation, an additional (optional) aeroshell, and improved side impact protection. That is what the Lazer Z1 offers. Building on a long tradition of innovation, Lazer decided to combine all elements of a high performance helmet and push each feature as far as possible. It is the lightest helmet Lazer has ever made without sacrificing style, safety, or comfort. Styling wise it has the looks of a contemporary high performance road helmet with an integrated wing on the top of the helmet. With the integration of the MIPS layer, the Z1 also has an additional protection aspect against rotational impacts. With the integration of the MIPS layer, the Z1 also has an additional protection aspect against rotational impacts. LIGHTER! Features: - MIPS Inside - Lightweight - T-Pro temple protection - Extreme ventilation - Aeroshell-compatible - Rigidity Brace System - Certification: CE - CPSC - AS - 190g (Small)

The Kali Grit Helmet is designed for performance road cycling. It features a Rheon Low-Density Layer (LDL) to protect you in the case of low-G linear or rotational impacts, and Kali's proprietary Supervents to increase overall strength and help with ventilation. The Grit also features the Frequency Fit System, with vertical adjust and dial retention, Fixed Strap Intersections, Unibody Construction and a Rollcage Internal PC Bridge, for added strength. - Rheon Low-Density Layer (LDL) reduces rotational impact forces up to 25% and reduces low-g linear forces up to 30% - Supervent: injection molded skeletal structure for added strength and larger volume intake vents - Frequency Fit System, with dial and vertical adjust offers three positions for maximum comfort and fit - Fixed Strap Intersections: Stops the straps from twisting, while keeping them flush against your face - Unibody Construction: Couples the upper and lower shells for a dialed fit and finish, while adding strength - Rollcage Internal PC Bridge: Used to increases the overall strength of the helmet

FOR DEMANDING TRAILS The CliffHanger is the flagship trail model in the ABUS MTB series. When you're riding up and down steep hills on an enduro bike, the MTB helmet offers reliable protection. Lighter, better ventilated and with an adjustable TriVider webbing spreader—the CliffHanger scores with these features. The special MTB adjustment system also ensures that the helmet sits comfortably and firmly on the head when rattling through the wildest of rock gardens. The inner shell made of EPS hard foam is foamed into a three-part outer shell, making a lightweight and sturdy helmet. The existing Multi-directional Impact Protection System (MIPS) can reduce energy by up to 40 percent in the event of an oblique impact. With the CliffHanger, we have succeeded in developing a helmet that offers virtually perfect conditions for high speeds and demanding trails. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - ActiCage: Structural reinforcement integrated in the EPS to optimise stability - Moulded lower shell for added durability - Height-adjustable visor - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 8 air inlets and 6 air outlets - FidLock magnetic buckle

A HELMET MADE FOR THE CITY STREETS The Pedelec 2.0 is an uncompromising combination of protection and comfort. Complemented by clever features, it is the ideal companion in road traffic. In big city traffic, a helmet is an indispensable companion for you as a cyclist. Accidents happen quickly and if you fall, a bicycle helmet protects you against serious injury. With the Pedelec 2.0, ABUS offers a bicycle helmet that meets the high safety requirements of the big city. Its deep temple area provides the required additional protection. The Pedelec 2.0 is also characterised by the integrated rain hood, which can be quickly pulled over the helmet at the first sign of rain. The especially bright, rechargeable light and the replaceable visor offer additional, passive protection. - This NTA 8776 helmet is a helmet that complies with the requirements in the Dutch Technical Agreement (NTA) 8776. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - High visibility due to powerful reflectors - Large, highly mounted and integrated LED tail light with 180° visibility - Forced Air Cooling Technology: Sophisticated ventilation system for an optimal head climate - Excellent ventilation with 4 air inlets and 9 air outlets connected with flow channels - Ponytail compatibility: Helmet well suited to plait wearers - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Size adjustment by means of a half ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and form fitting - Foamed-in fly nets - Lower edge protection: Provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Rain cover integrated in the helmet

Tackle technical mountain bike trails and test your riding limits knowing you're fully protected with the feature-loaded Jackal KinetiCore helmet. Supreme ventilation, built-in KinetiCore protection technology, and mountain bike-friendly features such as brow vents and an accessory mount make this a trail rider's dream lightweight lid. Leave the protection up to us, so you can confidently enjoy your ride. KinetiCore by Lazer is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built better by design. Integrated right into the helmet instead of added on after, KinetiCore delivers next-level protection in addition to weight reduction and increased ventilation. This helmet scores an esteemed "Best Available" 5-star protection rating from Virginia Tech. With simple and precise fit adjustability, eyewear recesses to stop your sunglasses from digging into your head, and airflow vents cleverly positioned to avoid fogging up your goggles, the Jackal KinetiCore is designed to enhance your mountain biking experience - streamlined with everything you need and nothing you don't. Specifications: WEIGHT: 340g (size medium) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: TurnSys VENTILATION: 19 ROTATIONAL PROTECTION: Lazer KinetiCore CERTIFICATION: CPSC ACCESSORIES: Action Camera Mount, Optional Universal LED Features: Magnetic Buckle The magnetic buckle connects quickly and is easy to use with full finger gloves. Action Camera Mount Never miss a moment. Jackal KinetiCore helmet includes a built-in camera mount to capture all your favorite action-packed memories as they unfold. The helmet shell is designed to prevent the mount or accessory from intruding into the helmet in the event of an impact. Eyewear Friendly Recesses in helmet shape removes the pressure on inside of head caused by the arms of sunglasses. Tailored Fit TurnSys technology provides a perfect fit on the fly with a simple turn of the dial. The magnetic buckle is easily managed with one hand and gloves on, ensuring your helmet is ready to roll whenever you are. Goggle Grip The no-slip design on the rear of the helmet prevents the goggle strap from moving out of position. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED at the back of the helmet, so you're seen no matter what the daylight or weather conditions are. Stay Cool and Comfortable Cleverly positioned ventilation channels increase airflow to keep you from overheating. When wearing goggles, air is channeled into the helmet above your eyebrows, lowering the chance of your goggles steaming up. Adjustable Visor (Space for Eyewear) Visor adjusts up and down for improved visibility in technical terrain and to keep your eyewear comfortably on hand, with a secure grip to reduce the risk of a goggle slip getting in your line of vision while riding. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Lightweight Design Built 13% lighter and with significantly less plastic than the previous Jackal MIPS helmet, its stripped-back design hits the sweet spot between protection and performance for a lid that's both more sustainably built and ultra-comfortable even on your longest rides.

The Jackal MIPS excels on the way up and the way down, with plenty of ventilation plus enhanced protective features. Throw in goggle compatibility, an adjustable visor, and removable light/camera mount and you have the perfect helmet for trail riding. The Jackal MIPS uses the ATS Fit System to tighten 360 degrees around your head for a secure fit and all-day riding comfort. The MIPS layer and deep coverage on the sides and back of the helmet give your head more protection if your ride goes sideways. The adjustable visor not only blocks the sun but can be pushed up to create a goggle parking spot. Eighteen vents move air in and out of the helmet to help keep your head cool on the longest of climbs. A removable light/camera mount is included. The helmet shell is designed to prevent the mount or accessory from intruding into the helmet in the event of an impact. Awarded the esteemed Virginia Tech 5-Star "Best Available" protection rating, the Jackal MIPS is a great choice for your next MTB helmet. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

The MET Rivale MIPS offers superior performance and an aggressive presence on the road that leaves a lasting impression. More safe. More comfortable. More efficient. With its MIPS technology, the Rivale combines an extraordinary price-quality ratio, as well as all the advantages of a brain protection system. MIPS is engineered to add at least 10% extra safety to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The Rivale's fit is unparalleled, and thanks to its Safe-T Upsilon retention system the helmet is stable on the head. The 360° head belt ensures that there will be no pressure points on the skull, and the easy to use vertical adjustment provides a customized fit. The front of the helmet is designed with wider and longer vents which improve ventilation and can also serve as a place to securely dock sunglasses. A combination that ensures pure riding fun. - In-mold polycarbonate shell with EPS liner - MIPS C2 rotational management system is engineered to add protection in case of certain impacts - Exceptionally comfortable and secure on the head thanks to refined internal shape - MET Safe-T Upsilon Fit System - 360° head belt, and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamic and comfort - Tube-shaped tail to improve aerodynamics - 18 vents are internally engineered with an air channeling system to improve ventilation and comfort - Reflective rear decals to enhance visibility in low-light conditions - Sunglasses ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

The combination of innovative design, the latest technology, outstanding functionality, maximum ventilation, and low weight make the Aventor a real allrounder. The Aventor is the perfect helmet for cyclists who need a cool head for riding in high temperatures and on challenging stages. - Double shell, in-mold construction for durable fusion of the outer shell with the shock-absorbing helmet material (EPS) - Lower edge protection provides the helmet with additional protection coverage - ActiCage, structural reinforcement integrated into the EPS, optimizes stability - Zoom Ace, fine adjustment system with handy dial provides a personalized fit - Half-surrounding plastic ring connected to adjustment system - Ponytail compatible - Fidlock magnetic strap buckle Sizing: - Small: 51 – 55cm - Medium: 54 – 58cm - Large: 57 – 61cm

SAFETY ON STEEP TRAILS Steep climbs, high-speed racing, all-day adventures: "Down-country" is action-packed, which means the demands on equipment also increase. Down-country is all about going up fast, down fast and repeating. The Moventor 2.0 MIPS is virtually perfectly for the demands of mountain bikers. The MTB helmet is lightweight, well ventilated and has a deeper fit that gives more protection at the back of the head. When the trail points downwards, the ten air inlets and nine air outlets provide good ventilation. In addition to all the well thought-out features for off-road use, the MIPS model has impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider strap system - Moulded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - Ventilation: excellent ventilation through 10 air inlets and 9 air outlets

- Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Lightweight ABS shell - Quick release liner for easy washing - 23 Large freeflow vents with internal channels for maximum cooling - Crash release visor system - Easy position visor, no bolts needed - D Ring closure - Certified: CPSC Bicycle & ASTM F1952-15 (Downhill) Sizing: - Small = 57 – 58cm - Medium = 59 – 60cm - Large: 61 – 62cm - X-Large: 63 – 64cm - XX-Large: 65 – 66cm

Whether you're racing, getting laps at the bike park or hitting your local trails the Project 23 ABS will keep you protected and comfortable. The ABS shell offers shock absorbency and incredible value for money while the 23 big bore vents for no compromise air flow will keep you cool. - 23 big bore vents for no compromise airflow - The most ventilated full-face hardshell helmet on the market - ABS shell offering shock absorbency and incredible value for the money - CRV (crash Release Visor) system allows visor to release on impact to help reduce rotational forces - TF (Through Flow) Goggle ventilation allows full airflow - Quick-release liner for easy washing and cleaning - Supplied with P.23 custom drawstring bag - Easy position visor angle no bolts needed - Injection-molded branded trim - Meets CE, CPSC, AS, ASTM F1952-15 standards - Sizes XS, S, M, L, XL, XXL (size large weight 850g)

The Pedelec 2.0 offers an uncompromising combination of comfort and protection. Complemented by clever features, it is the ideal companion when cycling in road traffic. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Forced Air Cooling Technology ventilation system keeps you cool and comfortable with 4 air inlets and 9 air outlets connected with flow channels - Zoom Ace Urban adjustment system with handy adjustment wheel for a customizable fit - Size adjustment by means of a half-ring made from particularly hard-wearing and slightly malleable plastic for optimal stability and fit - High visibility due to powerful reflectors and an integrated LED taillight with 180-degree visibility - Foamed-in fly nets keep insects out - Lower edge protection provides the helmet with additional protection from external influences - Fidlock magnetic strap buckle - Ponytail-compatible and well suited for braided hairstyles Sizing: - Medium: 52 – 57cm - Large: 56 – 62cm

The Sphere MIPS delivers a perfect combination of great looks, all day comfort, performance and features to help protect in the event of an impact. You will look forward to every ride in the Lazer Sphere MIPS helmet. The ARS Fit System enables progressive fit adjustment via a thumbwheel. It distributes pressure evenly around the head, eliminating hot spots and pressure points. The adjustable head basket is ponytail friendly. Eighteen vents orientated at a 15-degree angle assures maximum airflow when the helmet is in the riding position. MIPS protection helps reduce the risk of rotational injury. A polycarbonate layer built inside the helmet keeps the foam together in the event of a crash, offering better protection from successive impacts. Sphere MIPS has been awarded the 5-Star "Best Available" protection rating from Virginia Tech. A docking area makes eyewear storage easy and bottom-shell protection helps prevent damage to the helmet foam. The optional Aeroshell accessory protects against the helmets or offers an aerodynamic benefit when desired. The Sphere MIPS weighs just 280 grams. WEIGHT: 280g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Rollsys System (ARS) VENTILATION: 18 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: Optional Aeroshell Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Lazer Aeroshell compatible Multi use polycarbonate cover which fits over top of your helmet. It covers the front and side vents to protect your head from rain and cold or to gain an aerodynamic advantage. Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Rollsys System (ARS) Easily adjust your helmet's fit by using the thumbwheel on the top of the helmet. Lazer's unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of the head. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Well ventilated Carefully designed vents and internal channeling pull air into the helmet and across your head for increased airflow. Essential for performance and comfort during high temperatures and hard efforts.

Designed especially for e-bike and city commuting, the Urbanize NTA MIPS offers comfort, protection and also looks great. A number of thoughtfully designed features will make urban riding a breeze, no matter how strong your headwind is. The Urbanize NTA MIPS will give you extra confidence when you're riding in the city. It includes the Dutch NTA-8776 certification for higher speed e-bike use and MIPS protection to help reduce the risk of rotational impact injuries. Urbanize NTA MIPS has been awarded the Virginia Tech 5-star "Best Available" protection rating. It's also a very comfortable helmet, with the ATS Fit System offering progressive adjustment which eliminates pressure points. The head basket is adjustable and compatible with ponytails and a magnetic buckle make it quick—and stylish—to put on. Six vents will help keep you from overheating. A panoramic lens protects your eyes from wind and debris, and magnetically secures to the helmet when not in use. An optional winter padding kit is available, which provides extra insulation when it's cold. A rechargeable rear LED light will help keep you visible in low light. When you get to where you're going, take the light out to recharge and use the light mount to thread your U-lock and secure Urbanize NTA MIPS to your bike. Specifications: WEIGHT: 430g (size small) MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Advanced Turnfit System (ATS) VENTILATION: 6 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: LED Taillight, Winter Padding Kit Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm Features: Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Advanced Turnfit System (ATS) Easily adjust your helmet by using the turn dial on the back of the helmet for an aerodynamic and secure fit. Lazer’s unique fit system prevents hotspots or pressure points by making the adjustment around the entire circumference of your head. Rechargeable rear LED light An integrated LED tail light to improve visibility from the rear in low light conditions. Rechargeable by USB. Secure lens docking Magnetic attachment allows you to secure your lens to the top of the helmet when you’re not using them. Makes it easy to remove and replace your lens even while riding. Lock hole Large rear vent that you can use to secure your helmet with your bike using a traditional u-lock. Magnetic buckle The magnetic buckle connects quickly and is easy to use with full finger gloves. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. NTA8776 compliant NTA8776 is the Dutch helmet certification for speed pedelec and e-bikes with a maximum speed of 40kph. NTA8776-compliant helmets have been designed and tested for use at higher speeds. Panoramic Lens Panoramic lens provides crystal clear vision and protection. Integrates perfectly with the helmet for maximum aerodynamic performance. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet’s ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the “Best Available” rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet.

The MET Estro MIPS is a versatile road helmet ready for your longest day on the bike. As comfortable as a top-of-the-line helmet, its design is widely open to maximize ventilation at low speeds. With 26 vents, 17 of which are inlets and 9 are exhaust holes, all of them work in synergy with the internally engineered air channeling system to ensure maximum ventilation. The Estro MIPS is also exceptionally comfortable. The 360° head belt in the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull, and its internal shape is welcoming for almost all different shaped heads. Featuring the MIPS-C2 brain protection system, the MET Estro MIPS is able to slide against the head in the event of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The front of the helmet features two dedicated ports for securely docking sunglasses while resting or climbing. The design reflects the purpose - to adapt to various uses and environments. Widely open, deeper coverage, a versatile visor, and a full polycarbonate wrap that makes it more durable by avoiding exposure of EPS surfaces to outdoor conditions. - In-mold polycarbonate shell with EPS liner - Full polycarbonate wrapped EPS liner to enhance durability - Extended head coverage for more thorough skull protection - MIPS-C2 Brain Protection System add protection in case of certain impacts - MET Safe-T Upsilon Fit System - 360° head belt and vertical adjustments offer a customized fit - Air Lite straps with adjustable divider maximize aerodynamics and comfort - Sunglass ports to securely dock sunglasses - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Comfort pads are hand-washable - Certifications CE; AS/NZS; US

The MET Terranova MIPS is designed for trail and eMTB riding. The construction and fit are inspired by MET's Roam helmet, guaranteeing optimal comfort. The increased head coverage ensures a higher level of protection around the two most sensitive brain areas: the back and the temples. Featuring the MIPS-C2 brain protection system, the Terranova is able to slide against the head in the case of a crash, redirecting damaging rotational motion. The tool-free adjustable visor is injection-molded to flex and bend when there is an impact against it. This unique feature helps to manage extra rotational forces transferred to your neck in a crash. The Terranova MIPS also features two dedicated ports to securely dock sunglasses while climbing or resting. The 360° head belt in the MET Safe-T DUO retention system ensures that there will be no pressure points on the skull and makes the helmet perfectly stable on the head while riding on rugged terrains. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T DUO Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The injection-molded visor is adjustable and flexible to avoid extra rotation of the neck in case of a crash - Sunglass ports to securely dock sunglasses when climbing or resting - Exceptionally comfortable and secure on the head thanks to refined internal shape - 17 vents are internally engineered for air channeling to improve ventilation and comfort - Certifications CE; AS/NZS; US Sizing: - Small/Medium = 52 – 56cm - Medium/Large = 56 – 58cm - Large/X-Large = 58 – 61cm

The Veleno MIPS is the most versatile helmet in the MET range, giving the rider access to the entire world of cycling in one go thanks to its variety of features. Featuring the MIPS-C2 brain protection system, the MET Veleno MIPS is able to slide against the head in the case of a crash, redirecting damaging rotational motion. MIPS is a brain protection system—engineered to add protection to the standard construction of helmets in case of certain impacts. The MIPS Brain Protection System (BPS) is attached inside the helmet, between the comfort padding and the EPS. The visor is minimal and removable thanks to invisible anchor clips that keep the design clean and stylish in both modes. The Veleno MIPS comes with 26 air vents and finely engineered internal air channeling to maximize the airflow. It also features two dedicated ports for securely docking sunglasses while resting or climbing. The 360° head belt of the MET Safe-T Upsilon retention system ensures that there will be no pressure points on the skull and its internal shape is comfortable for almost all different shaped heads. - In-mold polycarbonate shell with EPS liner - Fully polycarbonate wrapped EPS liner enhances durability - Extended head coverage for more thorough head protection - MIPS-C2 Brain Protection System offers extra protection in the case of certain impacts - MET Safe-T Upsilon Fit System - The 360° head belt with vertical adjustments allow for a customized fit - The removable visor with hidden anchors ensures maximum versatility - Air Lite straps with an adjustable divider provide a comfortable and customized fit - 26 vents are internally engineered for air channeling to improve ventilation and comfort - Sunglass ports to securely dock sunglasses when climbing or resting - Certifications CE; AS/NZS; US Sizing: - Small = 52 – 56cm - Medium = 56 – 58cm - Large = 58 – 61cm

Feel at home when you leave the beaten track. The Oasiz MIPS helmet has got everything you need to enjoy the outdoors. The winner of the 2011 Eurobike Award is packed full of features and technology. It has the Rollsys Retention System with Adjustable Head Basket for an easy-to-adjust and perfect fit. On the inside it has the Rigidity Brace System for lightweight performance while still offering superior resistance again multiple impact crashes. It features Coolmax padding and 21 vents to ensure the helmet interior stays cool and comfortable. The clever Multimount system allows for the direct installation of a GoPro camera or headlight mounting adapter (each sold separately) onto the helmet. The MIPS system adds an additional safety aspect to the Oasiz helmet. A low friction layer is introduced into the helmet to absorb rotational forces in case of a crash. This does not take away anything from the original protective capabilities of the helmet, it just adds to them. Options: The Oasiz helmet can be outfitted with an insect net or winter padding so you can ride whatever the conditions are.

- Direct Flow Cooling guides airflow into ultra-deep internal channels optimizing ventilation at high and low speeds - Moto-style extended protection visor is infinitely adjustable and removable - Integrated goggle strap retainer helps goggles stay in position - Low and high speed impact-tuned construction with optimized EPS density, and super-tough polycarbonate shell - ESS brings together CINCH Pro, Optimal Position Y, and LiteForm webbing for the best straight-out-of-the-box fit and comfort - TransTextura PLUS X-odor anti-microbial pads - MIPS is a low friction layer between the head and the helmet that provides added protection with respect to angled impacts - Women's

The MonTrailer offers this increased need for protection and a multitude of well thought-out features for off-road use. This mountain bike helmet is light, extremely well ventilated and extremely comfortable and is perfect for racing or the everyday trail tour. - In-Mold for a durable connection with the outer shell with shock-absorbing helmet material (EPS) - Good ventilation with 5 air inlets and 7 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - Bottom edge protects the helmet from external influences - ActiCage, a structural reinforcement integrated in the EPS to optimise stability - Zoom Ace adjustment system with non-slip adjustment wheel for individual fit - GoggFit ensures safe positioning of glasses and provides storage space when not in use - The transparent visor gives the wearer good all-round vision without having to take their eyes off the trail

Well ventilated and with extended coverage, the Impala MIPS is a lightweight helmet for mountain bikers looking for comfort and great protection. Integrated features include goggle parking and MIPS technology. The Impala MIPS uses the ATS Fit System to tighten 360 degrees around your head for a secure fit and all-day riding comfort. Awarded the Virginia Tech 5-star "Best Available" protection rating, the combination of deeper coverage and a MIPS layer give your head more protection just in case things don't go your way. The bottom shell finishing prevents unnecessary damage to the helmet foam. The adjustable visor not only blocks the sun but can be pushed up to park your goggles, while the handy non-slip section holds the strap firmly in place. Twenty-two carefully placed vents ensure you keep cooler even on sweaty days. An anti-snag removable light/camera accessory mount is included and the helmet shell is designed to prevent the mount or accessory from intruding into the helmet in the event of an impact. The Impala MIPS is also compatible with the rear ATS LED light for when you're making the most of every last minute of sunlight. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

This is the aero helmet you want when you’re pushing your limits in racing and training. The Tardiz2’s aerodynamic shape and design features will ensure you’re cool, comfortable, and most importantly, fast. The aerodynamic Tardiz2 is built for speed. The teardrop shape of the helmet and its dimpled tail section improve airflow, saving you precious watts when you’re racing against the clock in triathlons and time trials. The TS+ fit system ensures a snug and comfortable fit and can be secured with an easy to access dial for fast transitions. The open front allows you to use your favorite eyewear. Three small vents in the front and large ports the open tail at the rear draw air in and through the helmet. For maximum cooling, the Aquavent allows you to squirt water directly onto your head. When every watt counts, use the closed ventilation cap to increase aerodynamic performance. - Weight: 372g - Material: EPS foam, polycarbonate, nylon Adjustable Head Basket - Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Aquavent - Spring-loaded cap on the top of the helmet. Use the tip of your water bottle to push the cap open and pour water directly on your head for evaporative cooling. Dimpled Tail construction - The rear of the helmet has a dimpled surface to trap an air layer around the tail of the helmet and improve aerodynamic performance. Eyewear friendly - The front of the helmet and ear pads are an open design so that you can use any eyewear without interfering with the helmet’s fit. Turnfit Plus system (TS+) - A unique fit system which prevents hotspots or pressure points by making the adjustment around the entire circumference of your head.

- COB LED Technology: it's a more compact footprint while delivering a higher intensity of light, meaning you'll be seen from further away and gives the lights a more uniform look - The helmet will be equipped with 98 COB LEDs in total - Front Light (30 COB LED diodes) - Rear Lights with Turn Signals (34 red COB LED diodes, 34 orange COB LED diodes) - 1100mAh rechargeable battery providing up to 10 hours with the lights set on maximum brightness - USB-C Charging Connection (Chargeable with a 5V—5.2V & 0.5A charger) - Remote included for turn Signal - Option to buy a Lumos Remote to activate Automated Brake Lights. (The Remote Lite included with Ultra doesn't come with an accelerometer and can only be used to activate turn signals) - Lumos Companion App: Customize your light flashing patterns, check your battery life, track your activity, and sync with Strava and Apple Health - Maximum Venting - MIPS technology Sizing: - Small: 51 – 55cm / 20 – 21.6" - Medium/Large: 54 – 61cm / 21.3 – 24" - X-Large: 61 – 65cm / 24 – 25.6"

THE BEST OF BOTH WORLDS The Hyban 2.0 combines a particularly robust hard shell with a huge air intakes. In combination with the integrated, bright LED rear light, the Hyban 2.0 is the perfect everyday helmet for the city. - ABS hard shell: Robust helmet made of EPS foam and injection molded outer shell - High visibility: High visibility thanks to powerful integrated LEDs - Bug mesh: Full protection from insects - Ponytail compatibility: Perfect fit for people with long hair - Full-ring: Adjustable ring connected to adjustment system enclosing all of the head - Excellent ventilation with 5 air inlets and 8 air outlets - Zoom Ace Urban: Finely adjustable adjustment system with handy adjustment wheel for customisable fit - Large, highly mounted and integrated LED tail light with 180° visibility

FOR MORE SAFETY The ABUS MoDrop MIPS can handle any terrain and any riding style and always leaves you wanting more. The mountain bike helmet is the best companion for big mountain days, experiences on the trail or just leisurely family outings. Equipped with our MTB-specific adjustment system and TriVider webbing distributors, this helmet offers many features that make it more comfortable to wear. The height-adjustable, visor-like visor protects you from hanging branches when riding downhill. In the event of a fall, it can also prevent direct impact with the face. Additional safety is provided by the MIPS impact protection. This is intended to protect the brain, especially if the cyclist's head hits the ground at an angle during a fall. In a fall, the brain is exposed to strong rotational movements that can lead to severe brain injuries. With MIPS, a movable low-friction plastic shell is integrated into the helmet to ensure that rotation is reduced and the head is better protected. - Multi-Shell In-Mould for a permanent bond between the outer shell and the shock-absorbing helmet material (EPS) - Zoom Ace MTB: Height-adjustable adjustment system to fit the head circumference - Ponytail compatibility: Helmet well suited for ponytail wearers - Laterally adjustable, non-slip TriVider webbing distributor - Molded lower shell for added durability - QUIN ready—easy upgrade with the separately available QUIN chip for fall detection - GoggFit: Device that allows a pair of goggles to be fixed to the helmet when the athlete doesn't need them while riding - MIPS: Impact protection that protects the brain, especially when the cyclist's head hits the ground at an angle during a fall. - Ventilation: excellent ventilation for this helmet type due to 6 air inlets and 8 air outlets - Bug mesh: thorough protection against insects

PROFESSIONAL TECHNOLOGY FOR BEGINNERS The Viantor is the high-quality and lightweight helmet for beginners in which we have used many proven technologies from the professional sport. Let yourself be convinced by a high-quality and safe helmet, which has the advantages of a professional race helmet. For maximum safety, the Viantor has the ActiCage structural reinforcement integrated in the EPS. It provides maximum protection while ensuring optimal ventilation and extreme comfort. The ActiCage allows for large ventilation openings without compromising on the helmet's safety. Due to its ponytail compatibility, the Viantor from ABUS is the first choice for riders with long hair. Multi Shell In-Mold for durable bonding of multi-part outer shell and shock-absorbing helmet material (EPS) - Ponytail compatibility: Helmet well suited for braided hairstyles - Good ventilation with 4 air inlets and 14 air outlets connected with flow channels - Semi-enclosing plastic ring connected to the adjustment system for optimum stability and form-fitness - ActiCage: Structural reinforcement integrated in the EPS to optimize stability - Zoom Ace: Fine-adjustable adjustment system with non-slip adjustment wheel for individual fit

- Bern's safest helmet - Integrated light included (removable) - Construction—Inmold - Compass Dial Fit system - Reinforced U-Locks - Removable visor - Adjustable strap divider - Compression molded pads - Average weight: 350g - MIPS : multi-directional Impact Protection System - 13 vents Specs: - Integrated Light: Yes - Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078, NTA 8776 E-bike - e-Bike approved: Yes Sizing: - Small = 52 – 55.5cm - Medium = 55.5 – 59cm - Large = 59 – 62cm

- Bern's safest helmet - Integrated light included (removable) - Construction—Inmold - Compass Dial Fit system - Reinforced U-Locks - Removable visor - Adjustable strap divider - Compression molded pads - Average weight: 350g - MIPS : multi-directional Impact Protection System - 13 vents Sizing: - Large: 59 - 62cm

OFF ROAD SECURITY The new Lazer Impala helmet is designed to elevate your riding experience, providing comfort and security while you ride and record. With extended shell coverage on all sides and EPS impact protection, it guarantees safety and peace of mind when riding, while keeping a low-fitting profile. The included action camera mount allows you to capture your experiences as they happen. A big adjustable visor protects you from sunlight, low-hanging branches and provides a space for goggle parking. A contrast color bottom shell is introduced to provide a clean finish and adds protection against wear and tear. The whole helmet is comfortable to wear thanks to the Advanced Turnfit System which provides 360 degree horizontal and vertical adjustments. Strategically placed inlet and exhaust vents keep your head cool when cranking out maximum effort. It even features brow vents to provide maximum frontal ventilation. Everything combines to provide a helmet that is at home everywhere and ready for all conditions. Ow yeah….and it looks GREAT! #DOWNFORIT - Increased protection - Internal ventilation channels - Large adjustable visor - Secure goggle parking - Premium features - Action camera mount - Advanced Turnfit system - MIPS layer - Fit System: ATS Advanced Turnfit System - Construction: In-Mold - Ventilation: 22 vents - Weight: 295g (S) - Certification: CE-CPSC-AS

Proven Kali protection in a lightweight stylish full-face helmet. Whether you're knocking out laps in the bike park or gearing up your grom for their first shred session, the Zoka is tough to beat. - Removable/Washable Liner - Anti-Microbial Pads - Adjustable Moto-Style Visor Material: - ABS Shell - EPS Foam Certifications: - ASTM F1952 - CSPC - EN 1078 Sizing: - Small = 55 – 56cm - Medium = 57 – 58cm - Large = 59 – 60cm - X-Large = 61 – 62cm

Be so bold in the all-new Ambush 2. Fully redesigned from the buckle up with essential features for next-gen trail riding, the Ambush 2 channels ample ventilation through modern styling, with a superb fit and dialed eyewear integration. - Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Sized to drop in with a highly customizable fit and precision adjustment. The Ambush 2 features our SBC Integrated Fit system and adjustable Tri-Fix splitters to provide a dialed fit. - Fine-tune your vision using the Ambush 2’s Occipital Base Adjustment to precisely adjust how the helmet sits on the brow for seamless integration with goggles and glasses for an unrestricted view down the trail. - Innovative sunglasses storage with hidden rubber flaps maintains a secure, rattle-free fit, keeping your glasses safely stored when you need to get them out of the way during long climbs or moments of rest. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet, drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed. - Integrated fixed visor with a breakaway feature provides increased trail vision and a seamless interface with eyewear while effectively channeling airflow through the helmet for superb ventilation. - Strategically optimized dual-density EPS foam eliminates bulk and reduces excess weight. - The Ambush 2 earned the highest 5-Star Virginia Tech Helmet Rating from the internationally renowned Virginia Polytechnic Institute and State University. - Features the MIPS SL solution with our exclusive perforated backing. Integrating MIPS technology within the helmet padding reduces moisture retention while increasing breathability. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Average weight: 360 grams (medium).

Be so bold in the all-new Ambush 2. Fully redesigned from the buckle up with essential features for next-gen trail riding, the Ambush 2 channels ample ventilation through modern styling, with a superb fit and dialed eyewear integration. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - Sized to drop in with a highly customizable fit and precision adjustment. The Ambush 2 features our SBC Integrated Fit system and adjustable Tri-Fix splitters to provide a dialed fit. - Fine-tune your vision using the Ambush 2’s Occipital Base Adjustment to precisely adjust how the helmet sits on the brow for seamless integration with goggles and glasses for an unrestricted view down the trail. - Innovative sunglasses storage with hidden rubber flaps maintains a secure, rattle-free fit, keeping your glasses safely stored when you need to get them out of the way during long climbs or moments of rest. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet, drawing heat away from the head. 4D brow cooling, which provides a gap between the helmet and forehead, draws airflow into internal air channels at every speed. - Integrated fixed visor with a breakaway feature provides increased trail vision and a seamless interface with eyewear while effectively channeling airflow through the helmet for superb ventilation. - Strategically optimized dual-density EPS foam eliminates bulk and reduces excess weight. - The Ambush 2 earned the highest 5-Star Virginia Tech® Helmet Rating™ from the internationally renowned Virginia Polytechnic Institute and State University. - Features the MIPS SL solution with our exclusive perforated backing. Integrating MIPS technology within the helmet padding reduces moisture retention while increasing breathability. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Average weight: 360 grams (medium).

Integrated for speed. Pursuit combines the aero speed of a TT helmet with the head-cooling ventilation of a pro road racing helmet. Tested and proven by Team Sunweb riders like Michael Matthews, who wore it to win the 2017 Tour de France points classification, Pursuit brings together innovative technologies to optimize aerodynamics, ventilation and comfort, all in one helmet. FEATURES - Optimized ventilated aerodynamics design - Design minimizes drag, producing maximum speed in real-world rider positions - Strategically placed AeroVent ports optimize airflow through the helmet, which improves aerodynamics and adds head-cooling ventilation - AeroVent ports pull incoming air through the helmet and streams it through deep internal channels to regulate temperatures during hard efforts - TransTextura Plus anti-microbial padding helps fight bacteria growth and the natural property of the fabric inhibits microbes that cause odors - Low and high-speed impact-tuned construction with optimized low-density EPS, and an ultra-thin toughened polycarbonate shell - Element Strap System (ESS) brings together Cinch Pro, adjustable locking dividers, and LiteForm webbing into one fit and retention system for superior fit and comfort right out of the box - Integrated MIPS Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Lightweight, LiteForm webbing wraps around the head better for a more secure fit and is hydrophobic so it won’t absorb sweat or stretch out like other webbing SPECIFICATIONS - Sizes: Western: S (51-55cm), M (55-59cm), L (59-63cm) - Weight: 230g (size M, CPSC) - Certifications: CPSC/CE, AS/NZS

The Kali Protectives Maya 3.0 is an upgraded version of Kali's best-selling Maya helmet. It includes new features such as a dial retention fit system, added venting, and a newly designed visor. - LDL (Low Density Layer) technology is used throughout the interior of the helmet to reduce rotational impact forces up to 25%, and reduce low-g linear forces up to 30% - Composite Fusion Plus technology incorporates layers of multi-density cone shaped EPS foam to absorb different levels of impact and direct energy sideways and away from the brain - Removable/washable liner - Anti-microbial pads - Flex moto-style visor - Bug liner - Locking buckle and sliders - Dial rention fit system

Dripping with the same style and class of our top end Z1 helmet, the Blade MIPS helmet combines great looks with high performance and safety. This is the helmet you wear on your weekend rides and your daily commutes. Its narrow shape combined with the Advanced Rollsys retention system provides an excellent fit and great adjustability. It has 22 vents to keep you cool and the weight is kept down to make sure you can fly down the road in comfort. And with the integration of the MIPS system, the helmet provides additional protection against rotational forces. The low friction layer inside the helmet helps to absorb impact forces in case of a crash.

- Visor: Yes - Impact Protection System: MIPS - Certification: CPSC, EN1078 - e-Bike approved: No

One helmet all road. The MET Allroad Mips is made for those who enjoy spending time on the saddle, whether on the tarmac or on gravel routes. Sporty on one side, comfy on the other. It's exceptionally lightweight and secure thanks to MET's distinguishing design. Perfect for your next bikepacking adventure. Featuring the MIPS-C2 brain protection system, the MET Allroad Mips is able to slide relative to the head in the case of a crash, redirecting damaging rotational motion. - In-mold polycarbonate shell with EPS liner - MIPS-C2 Brain Protection System - Snap in/out visor - Safe-T E-DUO Fit System - Vertical adjustment and ponytail-compatible - Integrated rear LED light - Reflective rear stickers - Internal air-channeling - Hand washable comfort pads - Adjustable cam divider - Certifications: CE; AS/NZS