Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Spring Cycling Essentials

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. -Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm -Designed to maximize bottle capacity on small frame bikes and dual suspension frames
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. -Three slots for additional adjustments over the B-RAD 2 base -Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
$1.99
Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders
$3.99
- 8 rubber fender stay caps - Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders
$4.00
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
$4.00
Compatible with: - Full bike fenders - 26" x 60mm - SpeedEz bike fenders - 26" x 60mm - Hardcore bike fenders - 26" x 60mm - Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
$4.39
• Composite construction • Fits standard bottles
$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
$4.99 - $8.99
Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.
$5.00
- Contains 2 Mudflaps and Quick-Snap Attachments - Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately) - For use with 45mm width fenders (sold separately)
$5.95
CatEye's nylon bottle cage is impact resistant and lightweight at just 29 grams.
$5.99
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
$6.19
Tote your potables and never run out of water on the road! Designed to easily mount to your bike's bottle braze-ons these alloy cages are a must-have for commuters, couriers, and anyone spending enough time in the saddle to work up a thirst. - Light, durable, rust-proof, alloy - Perfect for most 16-22oz bike bottles - Bolts not included (use the ones on your frame)
$6.39
- Universal alloy water bottle cage - Hardware included - Size: 6mm
$6.59
Origin-8's Pro Lite Alloy Cage is made of light and durable aluminum and provides a secure grip on your bottles. It's perfect for all your bikes and adds a touch of class.
$6.59
- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6
$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.
$6.99
- Releases front fender stays if debris is present in between fender and tire - Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)
$6.99
- .5L SKS water bottle - Made in Netherlands
$6.99
Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.
$6.99
•Steel •Chrome Plated •Front or Rear •Cruiser •26-inch x 75mm
$7.50
Giant's Gateway Bottle Cages use 5mm-thick tubular aluminum for a safe, secure, and rattle-free hold on your bottles.
$7.99
- Rigid alloy construction - Weighs only 65.2 grams
$7.99 - $8.99
JET is a biodegradable bottle made in food-grade squeezable polyethylene. The bottle has a sporty, sophisticated, and practical design that made it possible for us to achieve greater resistance for the bottle body while retaining unaltered its lightness and softness. Distinguished by an elegant and sinuous profile, the JET comes with a contoured bottle body with a smaller diameter for easier and improved handling, insertion, and removal of the water bottle under any circumstance. The standard 74mm diameter of the JET ensures it can be used with all the commercially available cages.
$7.99
- 6mm XL alloy tubing construction - Universal fit - Weight: 50g
$7.99
• Dual-density, lightweight PE and Kraton rubber bottle • Tasteless and odorless • Pull top valve • Bottle does not contain (Bisphenol A,BPA) or Phthalates • 24oz
$7.99 - $8.99
"You gotta stay hydrated" has practically become a company motto over here, but we're happier, healthier, and more hydrated than ever—so it's working! Whether it's a long ride, a long day in the office, or a long wait in the checkout line—taking a swig from your handy bottle keeps your body happy and firing on all cylinders. These bottles deliver top-of-the-line thirst-busting, fight mold, odor, and other grossness, and taste just like sipping out of a glass. A glass that's soft and flexible and fits right on your bike. So drink up—and look good doing it!
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
$7.99
Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.
$7.99
Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.
$7.99
• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body
$7.99
Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.
$7.99
• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body
$8.00
- Contains 2 Mudflaps and Quick-Snap attachments - Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately) - For use with 60mm width fenders (sold separately)
$8.00
Icon SS Water Bottle The Icon SS water bottle features a self-sealing cap for precise fluid flow and to prevent leakage. The body is improved with a softer BPA Free, Food Safe material allowing for better grip and fluid flow control. - Material: BPA Free, FoodSafe LDPE - Capacity: 21oz (621ml)
$8.00
Profile's Kage ensures you'll never lose your bottle again. The clever design provides a great grip and doesn’t leave ugly marks on bottles. And, the injection-molded nylon/fiberglass construction is incredibly strong and light, too!
$8.00
Profile's Stryke Kage ensures you’ll never lose your bottle again. Constructed of injection-molded nylon/fiberglass, this incredibly strong cage provides a great grip and doesn’t leave marks on bottles. Plus, this cage is super light, too.
$8.95
XLAB's Aqua Shot Calibrated Bottle has helped athletes win world championships and it'll help you perform your best, too. This unique, time-saving racing bottle has a high-flow squeeze valve and 4-ounce gradations so you can gauge your hydration. It's made of taste-free and safe BPA-free polyethylene with a fast-flow silicone valve that seals tight as soon as you stop squeezing. The valve is also not exposed to dust or contamination. This fine bottle is dishwasher top-shelf safe, can be used with carbonated beverages and is even shaped to fit better in bottle cages.
$8.99
- .75L SKS water bottle - Made in Netherlands
$8.99
Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.
$8.99 - $9.79
• Biodegradable bottle and cap • Easy to squeeze soft plastic, soft plunger • BPA free, California prop 65 compliant • Made in the U.S.A.
$9.00
The MSW PC-150 composite water bottle cages are a great value, providing easy use and are less likely to scratch the finish on most water bottles. - Composite construction - Does not include mounting bolts - Embossed MSW logo
$9.50
Features - Alloy bottle cage - 6mm alloy rod - Tough and still flexible - Compatible with various water bottles
$9.79
- 32 lumen single LED safety light - 2 modes - steady and flashing - 2 CR2032 batteries included - Water resistant design
$9.79
- 8 lumen, single LED safety light - 2 modes - solid and flashing - Up to 110 hour run time with 2 CR2032 batteries (included) - Multi-fit rubber strap attachment
$9.95
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
$9.95
XLAB's Mini Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 500ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
$9.99
• Dual-density, lightweight PE and Kraton rubber bottle • Tasteless and odorless • Soft rubber bite pressure valve • Bisphenol A/BPA and Phthalates Free
$9.99
- Lightweight and pliable LDPE bottle - Ultra-soft silicone high flow pressure valve - Tasteless and odorless - Bottle does not contain Bisphenol A (BPA) or Phthalates
$9.99
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
$9.99
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers - Disc adaptor spacers (60mm & 65mm widths only) Specific compatibility w/Planet Bike Fenders: - 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore) - 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full) - 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore) - 65mm Width: 29-inch x 65mm (Cascadia)
$9.99
The Slidecage from SK uses fiberglass-strengthened composite construction for light weight and impact resistance. The modular cage construction allows either right-hand or left-hand bottle insertion.
$9.99
X-Long Mudflap/Spoiler can be retrofitted to any fender profile of the correct size. A hole may need to be drilled in the profile if one isn't already there. - Adds 6 inches of coverage to any fender profile - 35mm size fits fender profiles up to 35mm - 53mm size fits fender profiles 46mm-55mm
$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each
$9.99
Sunlite's 330 Taillight helps you be seen. It sports a 100 hour run time with a 1/2 watt 3 LED system. The housing is water resistant and it has steady and flashing modes.
$10.00
Giant's Ally Quarter Socks use quick-drying, breathable TransTextura fabric with a mesh top and seamless heel.
$10.00
- Constructed using a 6mm aluminum rod - Embossed MSW logo
$10.00
Long battery life combined with simple, tool-free mounting makes MSW Mouse lights a great economical pick to be seen on the road. - Simple, tool-free mounting on bars from 22.2 - 35mm - 3 lighting modes: high, low, flash - CR2032 battery included
Page 1 of 30 Next page