Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

AheadSet Universal Preload Bolt
$0.90
- Aheadset preload adjusting bolt
All-City Tensioner Bolts
$5.00
All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm
All-City Fixed Cog Lockring
$10.00
- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread
All-City Top Cap
$10.00
Consider this the cherry on top of your sundae. Pull the whole thing together with an All-City top cap. - Includes star nut
All-City Cable Clamps
$15.00
Snap-on brake cable guides for bikes that don't have any. - Steel cable housing guide for 1-1/8" top tubes - Snaps on; no bolts - Set of 3 clamps
All-City Lock-On Bar Plugs
$15.00
Tired of losing your bar end plugs? Seeking a more secure solution that also venerates your favorite little bike company from Minneapolis? Well, boy howdy do we have just the thing...
All-City 809 Derailleur Hanger Axle Stud and Nut
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
All-City Singlespeed Disc Brake Adaptor
$20.00
All-City Singlespeed Disc Brake Adaptor 
All-City Shot Collar Seatpost Clamp
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware
All-City Cosmic Stallion Ti Cable Port Service Kit
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included
All-City Master Dropout Non Drive Side Kit
$50.00
The All-City Master Dropout is a sliding dropout system consisting of replaceable dropout plates and fixing hardware. Designed for use with 12mm thru-axles and flat-mount brakes, it is compatible only with select All-City models. - Allows riders to convert from a geared to single-speed setup or vice-versa - Compatible only with select All-City models - No additional chain tension adjustment required - Threaded cap / nut for axle installation - Cap nut and O-ring included - Use with drive-side plates
Avid Overcoat Noodle
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
Avid IS Disc Brake Adaptor
$23.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
Avid Post Bracket
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Avid Post-Mount Disc Brake Adaptor
$27.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
Avid CODE Disc Brake Lever Parts 2011-2016
$64.00
Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2011-2016 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever
BOX One 7075 Alloy Chainring Bolts
$29.99
Box One 7075 Alloy Chainring bolt kits include five 8.5-mm front bolts, five 6-mm front bolts, and five 5-mm rear nuts, so they will fit just about any chainring/crank combination, including those with threaded holes.
Campagnolo External EPS V2 Power Unit Mount
$16.00
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Not compatible with the V3 Power Unit - Required for external mounting of V2 Power Unit
Campagnolo EKAR Rear Disc Brake Adapter
$22.45
Campagnolo EKAR disc brake adapters. - Includes bolts
Campagnolo EKAR Front Disc Brake Adapter
$23.95
Campagnolo EKAR disc brake adapters. - Includes bolts
Campagnolo Cassette Lockring
$55.66
- Fits 2000 and newer Campagnolo wheels - Fits all Fulcrum wheels - Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer - 27.0mm thread OD 10-speed: - For use with Campagnolo cassettes with 12 to 16 tooth first position cogs - Lockring has a 38.5mm flange diameter 11-speed: - For use only with Campagnolo 11 speed cassettes with 12 tooth first position cogs
Campagnolo EPS Front Derailleur Stiffener
$82.45
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
Campagnolo Super Record/Record EPS Under Seat Cable Kit
$138.95
- EPS under-seat shifter cable kit
Campagnolo Record EPS V2 Interface Unit
$200.00
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
Cane Creek Thudbuster ST Elastomer
$4.99
Replacement inserts for Thudbuster G4 suspension seatposts.
Cane Creek Norglide Bushing for 14.7mm Bores
$6.00
Replacement bushings for Cane Creek shocks.
Cane Creek Lt Elastomer
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Soft Lt Elastomer
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Thudbuster Lt Elastomer
$7.50
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Cane Creek Shock Spring Converter Clip
$7.75
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Cane Creek DB Air/DB Air CS Outer Air Can Seals
$8.00
Replacement seals for servicing Cane Creek rear shocks.
Cane Creek 3G Short Elastomer
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
Cane Creek DBAir IL Volume Reduction Spacer Kit
$9.00
Air Spring Volume Reduction Kit - 1 x 5000 cubic mm spacer - 2 x inner air can o-rings
Cane Creek Thudbuster 3G Short Elastomer
$9.00
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
Cane Creek 40-Series 41-42/30mm Steel Crown Race
$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction
Cane Creek Helm Air Travel Reduction Clips
$9.99
Travel reduction clips for Cane Creek suspension forks.
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing - 36 x 45 Degree
$10.99 - $17.99
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing - 45 x 45 Degree
$11.00 - $21.99
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Interlok Spacer
$11.00
- Color-matched aluminum Interlok Spacer for Cane Creek headsets
Cane Creek 110-Series 41-42/30mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 41 and 42mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction
Cane Creek 110-Series 47/30mm Alloy Crown Race - 45 x 45 Degree
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
Cane Creek 110-Series 47/33mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction
Cane Creek 110-Series 52/30mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower
Cane Creek 110-Series 52/33mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
Cane Creek 110-Series 52/40mm Alloy Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Lightweight aluminum construction
Cane Creek 40-Series 52/30mm Steel Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower
Cane Creek 40-Series 52/40mm Steel Crown Race
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction
Cane Creek AER Series Interlok Spacer
$13.00
AER spacers feature strategic weight saving cutouts for the lightest build possible.
Cane Creek eeSilk+ Elastomer
$13.99
Elastomers are designed for use with eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Extra Soft: 40 Durometer - Soft: 50 Durometer - Medium: 60 Durometer - Firm: 70 Durometer - Extra Firm: 80 Durometer
Cane Creek 40-Series Short Top Cover
$14.00
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included
Cane Creek Thudbuster LT Elastomer
$16.99
Replacement inserts for Thudbuster G4 suspension seatposts.
Cane Creek Thud Glove
$18.99
Cane Creek's Thud Glove protects the moving parts of your Thud Buster seatpost from dirt and weather. Available in both short- and long-travel models. - Neoprene construction
Cane Creek Cloud 9 Rear Shock Seal Kit
$21.00
Replacement seals for servicing Cane Creek rear shocks.
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing
$22.99
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Ancora Expansion Plug
$24.99
Premium Expansion Plug For Carbon Steerer Tubes The Ancora premium expansion plug features 6000 series machined aluminum expansion wedges, paired with a knurled sleeve to ensure a secure preload. - Weight: 25g - Insertion length: 46mm - Contact surface length: 38mm
Cane Creek Thudbuster G4 Clamp Kit Short & Long Travel
$24.99
Replacement clamp kit for Thudbuster G4.
Cane Creek 40-Series Zinc-Coated Steel Cartridge Bearing Kit - 36 x 45 Degree
$29.99
40-Series replacement cartridge bearings feature durable black oxide construction. - Compatible with 110-, 40-, and 10-Series headsets
Cane Creek Hellbender Stainless Steel Cartridge Bearing
$29.99 - $52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
Page 1 of 18 Next page