Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

Greenfield RetroKit
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
Wolf Tooth Components RoadLink: For Shimano Wide Range Road Configuration
The RoadLink is a simple device that offsets the position of your Shimano road derailleur to make it possible to run a wide-range mountain bike style cassette. It is an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter. -The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes -11-42 or 10-42 setups are not supported -Works with all 10-11 speed Shimano and SRAM Road Derailleurs -Best used with Single or Double Setups - see manufacturer's site for more details
Wolf Tooth Components Tanpan 11-Speed Conversion
Tanpan allows the usage of Shimano Road Shifters with Shimano Dynasys rear derailleurs. Built to translate the differing cable pulls between the two systems, Tanpan allows for wider gear range, more gear options and better chain security with clutch derailleurs for road or gravel drivetrains. - Not Compatible with Tiagra 4700 - Compatible with most road, CX and gravel bikes - Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs - Certain chainring and cassette configurations benefit from a Goatlink - If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule - Designed to be used with Shimano 11-speed Dynasys Rear Derailleurs and Shimano 11-Speed Road Shifters
Sunlite 5mm Housing Ferrules
$0.99
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Cane Creek 10-Series Interlok Headset Spacer
$1.00
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
Cane Creek 1-1/8-inch Headset Shim Spacer
$1.08
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
KMC MissingLink Connector
$1.20
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
FSA Pedal Washers
$1.99
Stainless steel pedal washers - Sold in pairs
KMC Half Link Adapter
$1.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
Sunlite Adjusting Barrel
$1.99
- Aluminum w/lock nut - 18mm long/6mm O.D.
Sunlite Adjusting Barrel w/ Mount
$1.99
- Aluminum w/lock nut and mount - Slotted mount design
Sunlite Crown Race 27mm
$1.99
- Crown Race - Size: 27.0mm
Sunlite Derailleur Bracket Bolt & Nut
$1.99
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Sunlite Head Bearing Lower
$1.99
Replacement bearing for the lower half of YST8003 #7 headset.
Sunlite Head Bearing Top
$1.99
Replace the top bearing in your YST8300 headset with these caged ball bearings.
Sunlite Keyed Lock Headset Washer
$1.99
- Type: Lock washer - Size: 1" Keyed
Sunlite Nylon Cable Guide
$1.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
Sunlite Stem Binder Bolt
$1.99
- w/Nut - 1-3/4-inch
Sunlite Stem Bolt
$1.99
- 8x1mm Allen head
Sunlite Sunlite Derailleur Clamp Bolt
$1.99
- Model: Replacement bolt - Compatibility: Allen, M5x16
TRP Flat Mount Rear Caliper Mounting Bolt
$1.99
M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.
Shimano M9000 Hose Cover
$2.00
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
Surly Tuggnut/Snuggnut Retaining Clip
$2.00
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
Wheels Manufacturing Inc. M5x10 Socket Head Screw - 5pcs
$2.00
Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5
Sunlite V-Brake Cable Boot
$2.39
- Rubber - Color: Black
KMC 415H-OL Chain Connector
$2.50
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
Odyssey Gyro G3 Detangler Upper Top Plate
$2.50
The Gyro G3 upper top plate is designed for use with the G3 detangler.
Wheels Manufacturing Inc. Flat Head Screw
$2.65 - $3.50
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Wheels Manufacturing Inc. Socket Head Screw
$2.65
Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5
Wheels Manufacturing Inc. M8 Derailleur Hanger Bolt
$2.95
Replacement M8 Nut/Bolt Set for Wheels Mfg derailleur hangers. - M8 chainring bolt style fastener - Use with 5mm hex wrench
Page 1 of 36 Next page