Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Pedals

$39.99
The RaceFace Ride pedal features a slim nylon-composite platform, and offers a concave and lightweight design for legitimate performance. - Molded traction pins give you all the grip you need without risk of damaging your shoes or shins - Durable Cro-Mo steel axle features a standard 9/16” pedal thread and serviceable internal parts - 9/16"
$39.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising. - Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay - Cleats not included - 85 x 95 x 10mm platform - Hardware included, cleats not included
$95.99
Origin-8's Ultim8 MTB Double Clipless Pedals are easy to enter and exit while being built to last. They boast dual-sided, adjustable SPD compatible bindings. They feature chromoly axles and sealed cartridge bearings for durability, too. - Weight: 285 grams (pair)
$49.99
Get all the features of our Composite Pedal in a shape that works better for smaller feet. We recommend the Small Pedal for riders with a shoe size up to US 6.5 US (M), 8 US (W), 6 US (Kids), and 38 EU. The platform size is 97.5mm x 92mm compared to the Composite Pedal which is 115mm x 105mm. The Small Comp Pedals have 7 steel pins per side and come with our new Friendly Pins installed. The Friendly Pin is an aluminum nut that covers a regular threaded pedal pin. These are the same pins found on our full-size composite pedals. If you want more grip you can replace the long Friendly Pin nut with the shorter nut supplied in the box. The shorter nut leaves the aggressive pin exposed. Get pedals that fit your feet! Product Specs: - Weight: 330g - Platform Size: 97.5mm x 92mm - Pedal thickness: 18mm - Pins: 7 per side - Body Material: Nylon Composite - Recommended Shoe Size: Up to US 6.5 US (M), 8 US (W), 6 US (Kids), and 38 EU
$19.99 - $24.99
The Tom Dugan signature Grandstand pedals feature a slim design to keep feet close to the axle, dual concave and a wider platform. - 17mm thick at center - 105mm wide - Full Size 14mm heat-treated axle with 17mm wrench flats and 6mm broach
$85.50
There’s no need to choose between clipless performance and platform versatility with the MSW Flip II. Riders can go clipless on the commute or sport clogs on campus. Enhance your ride time with pedals that don’t set limits on your horizon. - Wear 2-bolt style cycling shoes or casual flat shoes - Single side clipless with platform - Chromoly steel, 9/16” spindle, bushing & bearing configuration - Spindle length: 58.5 mm - SPD-compatible 2-bolt cleats included, 4° float, 14.6 angle of release - Adjustable spring tension with tension indicator - Aluminum pedal body - Black
$59.99
Get connected to your daily ride with MSW's MP-100 Dual-Sided Clipless Pedals. They feature dual-sided entry so clipping in quickly is a snap, and the adjustable spring tension lets you customize exactly how much force it takes to unclip. These no-nonsense pedals are stellar in all conditions, and when the going gets sloppy, the mud-shedding design ensures you can still get in and out of your pedals quickly and easily.
$42.75
MSW Thump composite pedals feature a concave shape and tall pins to provide a "just-right" amount of traction--enough for the rigors of riding off-road--but with in-mold nylon pins to keep calves laceration-free on more casual rides. Balance doesn’t have to mean boring! - Tough nylon composite body with in-mold pins - Chromoly steel, 9/16” spindles, sealed cartridge bearings and nylon bushings - Platform size = 118 x 99 x 19 mm - Body: 18.5 mm thick with 2.5 mm of concavity for great control and comfort - Black - Made in Taiwan
$14.00
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat
$23.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring. - Use: Road - Material: Polyamide + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 68g
$28.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g
$60.00
The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!
$60.00
The X-TRACK is LOOK's entry level off-road pedal, but does not mean technology is left aside. The aluminum body and Chromoly+, double-sealed axles are robust and ensure total fluidity thru the pedal stroke. Tension can be quickly and easily adjusted from 6 thru 14. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Aluminum - Spindle: Chromoly+ - Platform area: 350mm² - Platform width: 57mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 200g - Weight (pair + cleats): 450g - Float angle: 6° - Release angle: 13°
$21.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g
$95.00
The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Composite - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 182g - Weight (pair + cleats): 415g - Float angle: 6° - Release angle: 13°
$20.99
- Forged alloy body with non-slip steel cage - Heat treated Boron 9/16" axle spindle - Sealed cartridge bearing system - Weight: 240g pair (9/16")
$21.99
- Look ARC Delta compatible - 9° rotation allows natural foot movement - Includes mounting hardware
$9.00
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm
$37.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 520g
$30.00
Dimension Combo Pedal Sets are assembled with size large toe clips, straps and reflectors. - Pedal Body Material: Plastic - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 475g
$19.99
Dimension Cruiser/Comfort Pedals. - Forged aluminum platform-type body with slip-resistant surface and built-in reflectors - Platform size is 105.5 x 74mm - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Platform - Spindle Material: Chromoly Steel - Weight: 448g
$11.00
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
$26.00
Dimension Mountain Compe Pedals. - Forged aluminum body - Accepts toe clips - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Toe Clip Compatible - Spindle Material: Chromoly Steel - Weight: 335g
$55.00
The V11 pedal is for those who favor durability, compliance, and affordability of composite pedals. Molded with the same proven shape as the multi-award-winning Vault pedal, providing a huge platform with DMR’s unique concave shape that allows your foot to sit deep into the center for supreme grip. - Durable glass-reinforced nylon body features eleven replaceable steel pins each side for rock solid grip - Pins are secured with captive locknuts for ultimate durability - Fully rebuildable with the same proven internals as DMR Vault pedals - Large platform area 105mm x 105mm, and 19mm thick - Low profile body with concave footbed
$24.95
A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip
$59.99
Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years
$26.99
Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals
$89.99 - $99.99
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.
$135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
$99.99
The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
$179.99
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability. - Weight (pair): 30 grams - Shoe compatibility: SPD - Release angle: 15 degrees
$30.99
Forged alloy platform pedals with a hardened chromoly spindle. - Molded pins - Size: 9/16-inch
$32.99 - $34.99
- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$54.95
e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"
$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes. - Weight: 135g per set with hardware - Float: 6°
$169.00
Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)
$199.95
Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.
$199.95
Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$52.00
Wellgo LU-A52 BMX Platform Pedals provide stability and traction where it's needed. - Removable traction pins - Sealed bearings
$18.50 - $19.07
Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins
$22.00 - $22.27
Wellgo B-Series BMX/Mountain Platform Pedals.
$18.72
Aluminum body with plastic cage overmolded.
$19.99
Wellgo LU-895 DU Caged Mountain Pedals feature a 1-Piece molded, cage-style body with DU Polymer bearing/bushings. Accepts toe clips/straps
$17.25
An affordable pedal option for city cruiser bikes. Features a rubberized cage.
$40.28
M111 Pedals Pedal Body Material: Aluminum Color: Black Pedal Type: Toe Clip Compatible Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 304
$48.18
Pedal Body Material: Aluminum Color: Black Pedal Type: Platform Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 390
$20.00
Wellgo Clipless Cleats for SPD Style pedals.
$39.95
Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"
$61.28
Wellgo WPD-95B Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-SH51 compatible - Four degrees of Rotation
$64.00
Velo Orange Pedals - Extruded and CNC-machined aluminum, sandblasted silver finish - 90 x 60mm platform with two replaceable pins on each side - Toe-clip compatible - 9/16"
$60.00
Lots of foot-huggin' lovin and a natural connection to your bike...that's what you get from VP’s all new, dual-concave platform design. VP-Aim was developed with input from both top free riders and local soul riders to deliver the right feeling of control and security at the right price. It’s still thin, it’s still stylish, and it can take all the beating that you can give it and keep rolling on. - 105 x105 x18mm platform - 9/16"
$80.00
VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
$50.00
VP's Vex Pedals are incredible workhorses with sturdy, large platforms and a dual-concave design with pins for an awesome grip. They're also light making them ideal for mountain biking, freeriding, BMX and even city riding. They're built to last, too, with cast-aluminum bodies, tough forged, heat-treated and CNC-machined chromoly axles and quality sealed bearings. - 385 grams - 9/16 axle
Page 1 of 8 Next page