Parts & Accessories

$30.00
Rear Thru Axle conversion kit for Go-Devil Hubs
- Converts QR to 142x12mm thru (axle not included)

$80.00
- 11 Speed Freehub Body for Shimano and Sram Cassettes
- XD Driver for SRAM Cassettes
- 11 Speed Freehub has 28 points of engagement
- XD Driver has 56 points of engagement
- Fits Go-Devil Hubs

$87.90 - $167.93
- USB and Cult ceramic renewing kits can be used to upgrade Campagnolo wheels that come stock with stainless steel bearings
- Kit includes (2) each of dust seals, hub cones, hub cups, and ceramic or steel ball bearings

$4.99
Challenge's Professional Rim Cement is just what you need to get your new set of tubies mounted up and ready to race. This product is only to be used on aluminum rims.

$10.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.

$19.99
Front axle and endcap kits for all non-boost 2017 cobalt, iodine, and zinc wheels. Use this front axle and endcap kit to convert any non-boost 2017 cobalt, iodine, or zinc wheel to the size selected below.

$19.99
These kits convert Crankbrothers rear hubs to 12mm thru axle and 10mm QR spacing.
- 135×10QR – 2017 3 & 11 kit (SKU 99204) compatible with: Level 3 & 11 4th generation (2017+) hubs
- 142/148×12TA – 2017 3 & 11 kit (SKU 99205) compatible with: Level 3 & 11 4th generation (2017+) hubs
- weight 23g per pair

$39.99
9/15/20mm conversion kit for current generation front hubs
- Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle.
- Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle.
- Conversion: 9/15/20mm
- Cobalt weight: 26g (9mm) / 16g (15mm)
- Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)

$89.99
A safe haven for your wheelset.
- Soft protective wheel bag for safe transport of two wheels up to 29 inches.
- Engineered for Crankbrothers by EVOC.
- Durable, water resistant construction made from polyurethane coated 600D polyester
- Internal divider keeps wheels protected from each other
- Integrated pocket for stowing small items
- Integrated axle protection
- Integrated carry handles

$12.99
CycleOps' Trainer Skewer ensures your trainer will hold your rear wheel in place. Made of heavy-duty stainless steel, it will provide years of reliable use and keeps your high-end skewers pristine.

$67.60
- ProLock: pre-prepped/treated nipple threads with special compound
- Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion
- Form-A design assures smooth fit and build
- Cold-forged nipple blank machined to DIN 79012 specs
- 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple)
- 2.0mm (14g) spoke thread interface with full run-through
- Made in Switzerland.
- Box/100

$29.99
- Lock and unlock with special key
- Lightweight aluminum key is easy to carry
- Anti-rust CrMo axle, stainless steel springs

$29.99
Secure your single speed, fixed and internally gear bicycle wheels easily with Delta's KnoxNuts for solid axles.
Never worry about wheel theft again. Delta's Fort Knox for wheels, these new high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key.
The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com.

$44.99
If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key.
KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer.
The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com.
Set Includes:
- Front blind-head skewer with KnoxNut
- Rear blind-head skewer with KnoxNut

$6.99
Replacement freehub spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- 3 hooks for affixing to spokes

$6.99
Replacement freewheel spoke protector, in various sizes for different freehub sizes.
- Made of clear plastic
- Fits around standard freewheel threads

$25.00
- Bearing/Spacer upgrade for greater durability on M1-121, M1-221, and M1-321 Hubs
- Includes 2 bearings, 1 sleeve and 1 bearing adjuster
- Note: does not fit M1-120 Or M1-220 Hubs

$29.99
Easton Tubeless Kits are designed to work with our tubeless ready Arc rims and Heist wheels, allowing you to enjoy the full benefits of a tubeless setup: less flats and a reduction in weight. Each kit comes with two removable core valves with removal tools, and enough tubeless tape for two 29-inch wheels. Easton tubeless valves have been designed for optimal seal with the shape of Easton rims and a have removable valve core for easy sealant application. Easton tubeless tape comes in various widths to match the internal width of your rims for a better seal and improved fit between rim and tire. Tape weighs 9-grams per wheel. Valves weigh 6.4-grams each.

$99.99
The Double Wheel Travel Bag is designed so your wheels sit offset — without axles or cassettes damaging each other. The Double Wheel Bag features a durable Cordura shell, high density padding to prevent damage, zippered closure system and can fit most size wheels from 700c to 26-inch.

$15.99
- 3-piece kit to secure wheels and seatpost
- Lighter and safer than regular QR skewers
- MTB 100mm/135mm
- Seatpost: M6 x 45mm

$22.99
- CNC machined alloy locking end nut
- Cr-Mo axle construction
- Patented hollow hex key anti-theft security
- Fits most City, MTN and Hybrid bikes (100mm/135mm)
- Lightweight and compact design
- 85g (Pair)

$24.99
- 6061-T6 aluminum lever construction
- Cr-Mo axle
- Road 100mm/130mm
- MTB 100mm/135mm
- 110g
Page 1 of 13
Next page