Filter By:
29-Inch
$309.00
Wider and even lower in profile, the Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by Stan's carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a tire pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance.
Crest MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release.
- 23mm internal rim width for more stability with larger tires
- Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats
- Laterally stiffer and stronger for improved handling
- Wider but even lighter than the original Crest
- More durable rim shape and alloy
- Neo hubs accelerate quicker and last longer
- Most trusted tubeless system for easy setup and low maintenance
- Sapim Secure Lock aluminum nipples
- Legendary Crest climbing and speed in a high volume rim
$308.00
- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires
- Durable 6069 aluminum with welded joint and reinforced spoke bed
- BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build
- Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.
$291.90 - $395.90
When motor assistance and leg power meet, the range of terrain a bike can conquer grows almost exponentially. The H 1900 SPLINE is designed for this, now upgraded with the famous DT Swiss Ratchet technology. The Ratchet LN system distributes the combined forces from the rider and the motor over a larger area than the previous pawl freehub systems, increasing the systems’ durability thanks to lower load peaks. The 370 hub enables full power transmission to the ground with reinforced hybrid spokes laced to a resistant aluminum rim, available in two inner widths.
- Aluminum rim, Hooked / Crotchet tubeless ready
- DT Hybrid 1 spokes are reinforced and increase the lateral and torsional stiffness of the wheel
- 370 Hub with Ratchet LN 18pt
- Includes Tubeless Valve and Tape, 6-bolt adapter with lockring
$210.90
Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is our answer to these developments. The rim is very durable and offers a 30mm rim width, which eliminates tubeless tire burping and allows you to reduce the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge.
$1,193.90
Our all-rounder. A 240 hub combined with a carbon rim results in a durable and versatile package.
The low weight of the carbon rim, specially designed for all-mountain use, combined with the latest evolution of the 240 hub with RATCHET EXP freewheel, make the XMC 1501 SPLINE ONE wheels the perfect partner in crime for all kinds of mountain adventures. The 30mm inner width of the tubeless-optimized carbon rim provides excellent support for the wide tubeless tire. Double-butted competition race spokes and the highest quality wheel construction round off our XMC 1501 SPLINE ONE wheels.
$975.90
The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel.
- Designed for All Mountain applications
- Carbon rim with 30mm internal width
- 240 hub
- Competition race spokes and Squorx nipples
$1,025.00
Riding is believing with the Zipp 1ZERO HITOP SW MTB wheelset when it comes to making you faster. Trail compliance is vital, with modern cross-country races becoming rougher and more challenging. No longer is it good enough for an XC wheelset to be stiff above all else. Instead, a wheelset should feel alive. The 1ZERO HITOP SW carbon rim complies with the terrain thanks to Zipp's proprietary HITOP Technology for carbon layup. The result is a lightweight XC wheel that carries speed through all sections of the trail, rocks, roots, and ruts with the durability required for a trail bike with up to 130mm of travel. A compliant wheel provides more confidence. You don't have to work hard to spin it up to speed or fight your bike when things get chunky. The 1ZERO HITOP SW also comes with the TireWiz tire-pressure monitoring system, so you'll always have your tire pressure dialed in for optimal performance. Among the lightest on the market, the ZM2 SL hubset ensures you'll be quick to accelerate and back on the pedals sooner after corners with the 1ZERO HITOP SW.
- HITOP Technology produces proprietary rim layup to provide compliance and confidence when the trail gets rough
- Low weight for effortless accelerations and climbing
- Winged rim provides a smooth resting surface for the tire, reducing the chance of pinch flats after a rock hit
- TireWiz 2.0 tire-pressure monitoring system features a seamless design
- ZM2 SL hub with 66 points of engagement
- Standard or Torque Cap options on the front hub
- XD or Microspline driver-body options
- Lifetime Warranty
$897.00
Zipp's 3ZERO MOTO carbon 27.5 and 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheelset and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective.
While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most.
At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features improved seal design for better durability on rough terrain.
Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride.
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
- Frustration-free tire installation
- Rim is designed for compliance, creating the feel of extra suspension
- Lifetime Warranty
$1,002.00
Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective.
While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most.
At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain.
Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride.
- Higher impact resistance
- Reduced chance of pinch flatting
- More traction in rough corners
- Smoother ride in rocky terrain
- Ability to run lower tire pressure
- Reduced rider fatigue
- Frustration-free tire installation
- Rim is designed for compliance, creating the feel of extra suspension
- German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability
- Lifetime Warranty
$69.99
- Affordable and reliable 29'' / 700C disc brake wheels for entry-level hybrid, MTB and touring bikes
- Black Alex Z1000 single wall rim offers great performance and look at a low price
- Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes
- Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience
- 36 stainless steel spokes and brass nipples for improved durability
- TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes. See "Documents and links" for more details on compatibility.
$69.99
- Affordable and reliable 29'' / 700C disc brake wheels for entry-level hybrid, MTB and touring bikes
- Black Alex Z1000 single wall rim offers great performance and look at a low price
- Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes
- Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience
- 36 stainless steel spokes and brass nipples for improved durability
- TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes.
$64.99
- Affordable and reliable 29'' / 700C disc brake wheels for entry-level hybrid, MTB and touring bikes
- Black Alex Z1000 single wall rim offers great performance and look at a low price
- Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes
- Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience
- 36 stainless steel spokes and brass nipples for improved durability
- TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes. See "Documents and links" for more details on compatibility.
$1,749.99
Rims: WTB CZR i30 Carbon 29"
- ETRTO 622-30
- Inner width: 30mm
- Made from Torayca T700 UD carbon fiber, striking a fine balance between stiffness and compliance
- Asymetric and angled spoke hole drilling distributes spoke tension more evenly
- Externally reinforced spoke bed
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip (included)
- 32 holes
Front hub: Sram 900 Boost
- 15x110mm Thru-Axle (Axle not included)
- 6 Bolt Disc Mount
- Sealed cartridge bearings
Rear hub: Sram 900 XDR Boost
- 12x148mm Thru-Axle (Axle not included)
- 6 Bolt Disc Mount
- Sealed cartridge bearings
- Sram Double Time 4-Pawl Ratchet Freehub, 52 Points of Contact, 6.9 degree engagement angle
- Compatible with 11,12 speed XD (1.85mm spacer included)
Sold in Pair, including:
- Tubeless Valve (x2)
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)
$1,659.99
Rims: WTB CZR i30 Carbon 29"
- ETRTO 622-30
- Inner width: 30mm
- Torayca T700 UD carbon fiber for stiffness and compliance
- Asymetric and angled spoke hole drilling
- Externally reinforced spoke bed
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip (included)
- 32 holes
Front hub: Shimano XT HB-M8110-B Boost
- 15x110mm (Axle not incl.)
- Center Lock (6-Bolt adapter incl.)
- Polished angular contact bearings
- Contact sealed hub
Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) / FH-M8110-B (Boost, MS) / FH-M8130-B (SuperBoost, MS)
- Center Lock (6-Bolt adapter incl.)
- Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement
- HG compatible 10/11 speed MTB (12 speed HG with 1.85mm spacer, not included)
- MS compatible 12 Spd Micro Spline
Sold in Pair, including:
- Tubeless Valve (x2)
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)
$179.99
Rims: WTB HTZ i30 29"
- ETRTO 622-30
- Inner width: 30mm
- 6061 series aluminum
- Asymetric and angled spoke hole drilling distributes spoke tension more evenly
- Reinforced I-Beam profile
- Strong sleeved joint
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip included
- Tubeless valve included
- 32 holes
Rear hub: Shimano FH-MT400-B (Boost, HG)
- 12x148mm (Axle not included)
- Center Lock (6-Bolt adapter included)
- Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement
- HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer)
- MS compatible 12 Spd Shimano Micro Spline only
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)
$157.99
Rims: WTB HTZ i30 29"
- ETRTO 622-30
- Inner width: 30mm
- 6061 series aluminum
- Asymetric and angled spoke hole drilling distributes spoke tension more evenly
- Reinforced I-Beam profile
- Strong sleeved joint
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip included
- Tubeless valve included
- 32 holes
Front hub: Shimano HB-MT400-B Boost
- 15x110mm (Axle not included)
- Center Lock (6-Bolt adapter included)
- Angular contact bearings
- Contact sealed hub
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), 14mm Brass Polyax Nipples (Black)
$299.99
Rims: WTB HTZ i30 29"
- ETRTO 622-30
- Inner width: 30mm
- 6061 series aluminum
- Asymetric and angled spoke hole drilling distributes spoke tension more evenly
- Reinforced I-Beam profile
- Strong sleeved joint
- Drilled for Presta valve
- TCS 2.0 Tubeless System compatible
- Solid Strip included
- Tubeless valve included
- 32 holes
Rear hub: Shimano XT FH-M8130-B (SuperBoost, MS)
- Center Lock (6-Bolt adapter included)
- Quick Engagement Freehub, 36 Points, 10 deg. engagement
- HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer)
- MS compatible 12 Spd Shimano Micro Spline only
Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Brass Polyax Nipples (Black)
$129.99
- Rims: WTB ST i23 (Black), inner width: 23 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Front hub: Formula DC71(Black), Laser etched logo, 15mm TA, O.L.D. 100mm
- HG Freehub compatible with 8—10, MTB 11-speed
- 6-bolt disc mount
- Sealed bearings
- TA Axles not included
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
- Tubeless Compatible (Valve and Tape not included)
$189.99
- Rims: WTB ST i23 (Black), inner width: 23 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Rear hub: Formula DC360 (Black), Laser etched logo, 12mm TA, O.L.D. 142mm
- HG Freehub compatible with 8—10, MTB 11-speed
- 6-bolt disc mount
- Sealed bearings
- TA Axles not included
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
- Tubeless Compatible (Valve and Tape not included)
$199.99
- Rims: WTB ST i30 (Black), inner width: 30 mm
- New TCS 2.0 Tubeless system
- Solid Strip (included) protects and ensures a smooth surface between the tire and the rim
- Easy On-Ramp profile allows for a smooth tire installation and stress-free inflation
- Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency
- Drilled for Presta valve
- 32 holes
- Rear hub (1): Formula DHT148 (Black), Laser etched logo, 12mm TA, O.L.D. 148mm BOOST
- Rear hub (2): Formula DC2241 (Black), Laser etched logo, M9x141mm BOOST141
- HG Freehub compatible with 8—10, MTB 11-speed
- 6-bolt Disc mount
- Sealed Bearings (DC711 & DHT148)
- TA Axles, not incl.
- Quick Release binder incl. (DC2241)
- Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)
- Tubeless Compatible (Tubeless Valve included)
$749.95
CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit.
Solid Strip & TCS Tape
- Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke.
3-Cross Lacing & Brass Nipples
- Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together.
Frequency Hub
- The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement.
Heavy-Duty Pawl Springs
- CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement.
Usage: Trail, Enduro
$849.95
CZR i30 wheels were designed to handle it all, which is why they feature a strategically reinforced carbon layup and are hand built using double-butted spokes, brass nipples and high-engagement hubs featuring top-tier bearings and oversized freehub seals to establish themselves as wheels that simply won't quit.
Solid Strip & TCS Tape
- Durable nylon strip that lies between the rim and tubeless tape to prevent tubeless tape from pushing into the spoke holes and ensures a smooth interface between the tire and rim. The smooth surface makes it easier to mount a tire by preventing air from escaping around the bead at each indent during inflation. Solid Strip also protects the airtight system from puncture in the case of a broken spoke.
3-Cross Lacing & Brass Nipples
- Too many companies are trying to save weight by offering "enduro" wheels with 2-cross lacing patterns and inadequate alloy nipples. While those are suitable for XC and light trail usage, there's no replacement for the long-term reliability of a 3-cross lacing pattern with brass nipples holding it all together.
Frequency Hub
- The world's best carbon rims deserved to be paired with high-quality hubs that further improve the performance of a lightweight, dependable carbon wheelset. Frequency hubs feature a low-drag, 6-pawl design that alternates contact between two sets of 3-pawl groupings to provide a responsive 5 degrees of freehub engagement.
Heavy-Duty Pawl Springs
- CZR i30 wheels feature heavy-duty pawl springs that engage with greater force to counteract the additional torque caused by sudden cranking on steep trails. We also offer a Light Pawl-Spring Kit that can be purchased separately for CZR i30 riders who prefer a quieter hub with lighter pawl engagement.
Usage: Trail, Enduro
$324.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings
$389.95
Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down.
- 30mm inner rim width with 32 spokes laced in a 3-cross pattern
- 6069 aluminum alloy rim is TCS 2.0 tubeless-ready
- Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze.
- Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke.
- 6-bolt rotor mounts
- Top-tier EZO sealed bearings
$308.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00
- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 28mm internal width ideal for 2.2-2.5" tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$308.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$657.00
- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal.
- 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires
- Light and durable 6069 aluminum with welded joint and reinforced spoke bed
$833.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims
- Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel
- M-pulse hubs
- 250lb Recommended Maximum Rider Weight
$1,154.00
- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims
- Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger
- Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel
- M-pulse hubs
- 250lb Recommended Maximum Rider Weight
Page 1 of 4
Next page