Shop Gear

- Waterproof IPX7: Operates even after 30 minutes of submersion in a depth of 1 meter - 3x brighter than EL135 - OptiCube lens technology - Low battery indicator - Mode memory function - Two light modes (Constant / Flashing) - Replaceable bracket spacer - FlexTight bracket - Runtime: Constant: 30 hours (50 lumens) (Approx.) Flashing: 250 hours (50 lumens) - Battery type: 2 x AA alkaline battery

Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own FEATURES - Constructed in two parts, aluminium centre and stainless steel braking surface. - High performance disc, allowing the stainless steel outer to expand separately from the centre and handle high temperatures without warping. - Hope floating rotors have a true floating design which allows 1 degree of freedom. This means the outer is always free to expand when subjected to heat. - Lightweight design. - Aluminium centre acts as heat sink keeping disc temperatures lower. - CNC machined centre is stiff and lightweight so has the advantages of a thicker fixed disc without the weight penalty.

Stainless steel bearings for less friction and greater durability. Fits 89.5, 92, 104.5, 107 and 121mm bottom bracket widths. Designed to suit cranks with a 30mm axle in a Press Fit 41mm bottom bracket shell. **NOTE** 30mm PF41 bottom bracket does not use a threaded centre tube. Weight 77g.

Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange

- Ideal fit for very short stems with steep upward stem angles - 1cm rise in the base will allow larger cycling computers like the Garmin 1030 to nest securely above the stem without interference

- For Integrated Handlebar (one piece) bar/stem - Pro-level mount with -7 degree articulation for custom computer positioning - Lifetime warranty. CNC Machined. Black Anodized - GARMIN approved replaceable computer insert protects computer tabs - Combo- Computer and GoPro style camera/light compatible - M5 hardware included. If a smaller bolt required, use an 8.4mm washer to ensure a secure fit. - Made in House. Boise, Idaho USA

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Wahoo computers including Wahoo Roam - CNC machined 6016-T6 aluminum - Weight: 54g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

- CNC Machined Aluminum - Combo (Computer on top – light or camera underneath) - WAHOO approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top - 123g / Bottom 242g on K-EDGE K13-580 Combo adapter - Weight: 60g - Mount Type: Clamp 31.8mm - Mount Weight: 60g Compatibly: - All WAHOO Cycling Computers – ROAM, BOLT, ELEMNT, MINI

- Inverted tread design and knurled tread surface are low profile and fast rolling without sacrificing traction - Front and Rear application

- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

The new version of the Maxxis Forekaster is aimed squarely at modern short travel (100mm-130mm) trail bikes – aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster (released July 2022) rolls faster than a Minion or even the Dissector but provides more predictable cornering, climbing, and braking traction than the Aspen or Rekon.

The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes - aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.

With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control.

With numerous race wins under its belt and untold miles of backroad adventures, the Rambler is our most popular gravel offering. Tightly-packed center knobs are ramped for rolling efficiency on hardpack roads and asphalt. The cornering knobs are spaced farther apart for control in variable conditions.

The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

An Aluminum Bike Basket. Powder coated black, rugged, and still lighter than the alternatives. The OMM Basket Can’t Be Beat! We built this basket to bolt directly to our racks for a stable and rattle-free ride. The basket pattern is Molle compatible so you can attach your favorite accessory pouches. - Stamped and welded aluminum construction is corrosion proof and designed to last. - Molle compatible: Customize your basket with accessories designed for Molle mounting pattern. - Compatible with basket bags designed for "137" baskets. - Bolts directly to OMM racks for a reliable and rattle free connection. - Hardware included for bolting directly to all current OMM racks. - Durable black powder coated finish. - Weight: 499 grams 17.6 oz - Dimensions: Depth 13cm, Bottom: 33 x 20cm, Top: 38cm x 26cm - Lifetime warranty

Where are you going? Absolutely anywhere with the Ponderosa Panniers. These bikepacking panniers are ready for everything. - 13 Liter capacity per bag - Fully welded and waterproof construction - Dual framesheets; front and back of the bag. Front framesheet is removable. - Roll top enclosure that can be secured down to the side or to itself at the top to form a carry handle - Removable and replaceable straps - Minimal branding on velcro patches - Lower attachment/compression strap remains under load to prevent bags from flapping around - Hypalon reinforcements at all attachment points are more abrasion resistant and provide extra grip where needed. - Clip light slots on the back. - Great fitment on all racks designed for panniers. Perfect fitment for OMM pannier racks Minimalist weight = 475g (each), 950 grams per pair. Without side compression straps, front framesheet, or side roll top clips. Full Featured weight = 560 g (each), 1120 grams per pair

Rear pannier (single bag) with three-dimensional front pocket and roll closure; Quick-Lock 2.1 System; PU-coated Cordura fabric, incl. inner pocket, large reflectors, shoulder strap with two fastening options on the bag. Can be combined with rack pack 24 L and 31 L on the rear rack. Separately available accessories: Pannier Stabilizing Insert (F3911), Packing Cubes/Pannier Commuting Insert; Carrying System Bike Pannier (F35); Anti-theft device (E125); Outer pocket 2.1 L; Mesh pocket (F9121); QL2.1 hook 18 mm (E211) & 20 mm (E193).

The non-PVC Pedal-Mate is your ideal companion for your city commute or lightweight bike ride. This sturdy bag keeps its shape so you can set it down comfortably without it tipping over. The shoulder strap makes it easy to throw the bag over your shoulder when you arrive at your destination, and the padded laptop compartment keeps your electronics safe, making the Pedal-Mate the perfect partner for your daily commute. The convenient magnetic closure provides quick access to all your essentials, while the additional exterior mesh pocket is ideal for frequently used items. Inside, a zippered pocket keeps your office tools, cell phone and keys close at hand. Thanks to the universal Quick-Lock2.1 system, the bag fits on almost any luggage carrier. Of course, the Pedal-Mate is also waterproof, sustainably manufactured in Germany and offers you the world-famous ORTLIEB quality. FURTHER PRACTICAL FEATURES - Padded laptop compartment for up to 13" notebooks - Removable shoulder strap - Reflectors - Sturdy bag body

The Toptube-Bag is a convenient accessory that allows you to quickly and easily access your snacks, smartphone, or other small items while cycling.The magnetic lid closure enables you to open and close the bag with one hand, so you can keep your focus on the road ahead. This bag features an innovative Tube-Lock system, which makes it easy to attach and remove from the bike. The system can be directly attached to threaded eyelets on the top tube or attached flexibly using rubberized straps if there are no threaded eyelets. The bag lid comes with a silicone holder that can accommodate various smartphone sizes, as well as an integrated cable outlet to charge your devices while riding. Inside the PU-coated bag made of robust nylon fabric, an inner mesh pocket makes it easy to organize your equipment. FURTHER PRACTICAL DETAILS - Also suitable for mounting on carbon frames - If the threaded eyelets are not in the right place, you can flexibly adjust the position of the Toptube-Bag with the optional Offset-Plate - Reinforced bag body

- Take your recovery to a whole new level - 20 grams of Plant based Protein - Whole Superfoods, Chia & Flax Seeds - Omega-3, fiber, and antioxidants for digestive health and more

- Waterproof (10,000mm) - Highly breathable (10,000gm/24hr) - Micro fleece-lined collar for added comfort and warmth - Quick-dry mesh lining for extra comfort - Utilises our REFLECT360 retro-reflective material - Adjustable waistband and velcro cuff - Waterproof storm zip - Seam-sealed for extra waterproofing - Side pockets - Low profiled rear spray guard - Machine washable - Weight—440g (size variable) - Fabric 100% Polyester with TPU waterproofing