Filter By:
- Electronics (301)
- Eyewear (48)
- Fenders (149)
- Hydration (294)
- Lighting (413)
- Locks/Security (286)
- Nutrition (73)
- Packs/Racks/Baskets (748)
- Show More Categories
- Pumps/Inflation (290)
- Safety (147)
- Storage (85)
- Tools/Maintenance (1423)
- Trailers/Strollers (91)
- Other (166)
- Indoor Cycling (66)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Accessories
$7.49
Breaking a sweat? Grab some Nuun Sport! When you sweat, your body loses vital minerals and electrolytes that need to be replaced for healthy recovery and lasting performance. Nuun Sport provides a great balance of ingredients for mineral replenishment and optimal hydration before/during/after your workout.
- 10 tablets per tube. Dissolve in 16oz. of water.
- These statements have not been evaluated by the Food and Drug Administration. This product is not intended to diagnose, treat, cure, or prevent any disease.
$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm
- Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$44.95 - $49.95
Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris.
- Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks
- Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base
- Slim, streamlined design that will stay out of the way of cranks and pedaling legs
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool.
- Weight: 38.5g
- Size: 116 mm x 20 mm x 9 mm
- Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains
- Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$24.95
The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement.
- Hand-bent hollow tubing
- Fits any bike frame that has two standard bottle cage mounts with 64mm spacing
- Easily bent back in to shape if damaged
- Made by hand in Minnesota
$99.95
Developed in the cold Minnesota weather, Wolf Tooth Singletrack Pogies handle the ever-changing winter weather while keeping hands warm.
- Easy hand access
- Adjustable cuff allows you to adapt the warmth of the pogie based on the weather conditions and how hard you are working
- With the cuffs folded down the hand opening flares open and provides coverage up to your wrist
- Velcro, snap, and strap cinch seal around handlebar and cables
- Patent-pending design with three distinct warmth settings: Warmest (cuff up, zipped up), Warmer (cuff up, zipper open), Warm or Singletrack Mode (cuff folded down)
- Waterproof and durable rip-stop nylon construction
Compatibility
- Fits most flat bars. The inner diameter of the handlebar should be between 17mm and 20mm. For most carbon bars and lighter aluminum bars, it is helpful to wrap a few layers of electrical tape around the plugs before inserting into the bars and tightening the screws.
Tech Specs
- Weight: 280g / 20g plugs
- Material: 420D Diamond Rip-Stop Nylon laminated with jersey and closed-cell foam. Fabric is waterproof but seams are not waterproof sealed.
- Includes: Two Pogies and two durable quick-disconnect handlebar plugs
$39.90 - $51.90
- Shop quality bicycle display and storage stand
- Graphite ripple powdercoat over steel construction
- Four-Point, Foam rubber end-Cap feet
- 2 Piece design disassembles for space-Efficient storage
- Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires)
- Retail model features flat-Packed, Bolt-Together base construction
- Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
$9.79
- Evaporates fast and leaves no residue
- A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants
- No water rinsing is required
- Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors
$60.00
- Whisky Carbon Water Bottle Cage
- Cage Material: Carbon
- Mount Type: Bolt-On
- Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
$15.00
Everyone deserves a fresh, new water bottle now and then. This classy 22-oz. bottle from Whisky works great and is sure to make any bike a little fancier.
- Purist technology shields the inside of the bottle from any bad taste, mold, or staining
- Squeezable materials allow for unmatched flexibility and comfort
$9.95
Light-duty zip tie
- 200mm length x 2.5mm
- Bag of 100
$3.73
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced.
- For Torx Plus screws
- Particularly hard for semi-hard materials
- 1/4" hexagon drive
- High torque transfer
- Size: 40 IP x 25mm
$40.99 - $143.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket.
- Simple design for easy use
- Lightweight, yet sturdy
- Steel rack w/adjustable brake bolt mount
- Loading surface = 13" x 5"
- Lightweight at just over 2 pounds
$30.99
This front basket system uses a bolt-on handlebar mount to allow for quick and easy removal of the basket itself.
- Extended handlebar clamps allow greater clearance for shift and brake cables
- Requires 3.5" of handlebar clearance for mount
- Fits 7/8" to 31.8mm handlebars
- Made in USA
- Dimensions: 11.75 x 8 x 9"
$34.00
This versatile basket is based on Wald's popular 133 basket but uses a holder that bolts onto your handlebar. The holder offers greater clearance between the bar and basket for shifters, cables, and brake levers.
Available in white (3133WH) or gloss black (3133GB) powder coat finishes.
- Made in U.S.A. (Maysville, KY)
- A Quick Release Basket with Bolt-on Holder for stable installation and use
- Lift the handle to remove the basket and take it with you
- Basket locks back in place when returned to the holder
- Dimensions: 14.5 x 9.5 x 9 inches; the basket tapers to 12.25 x 7 inches at the bottom
- Holder designed to fit 7/8", 1" and 31.8mm diameter handlebar
- Handlebar clamps are 2" apart and offer clearance for shift and brake cables
- Powder Coat Finish
- Complete basket including the holder weighs 3 lbs.
$29.99
- Steel wheels
- For riders up to 100lbs
- Fits 12" - 20" wheel bikes
$27.50
Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation.
The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.
$25.00
The Moderniste Bottle Cage continues to be a favorite for retro and contemporary bikes. The elegant, minimalist design securely holds a plastic or stainless steel water bottle. This beautifully polished cage is made from lightweight, tubular stainless steel, so it is strong and exceptionally lightweight (43g).
The cage can also be squeezed inward or expanded to get the perfect fit for your preferred water bottle.
$12.00 - $15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris.
- Mounts to the back of the fork crown via brake bolt or through bolt
- Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers
- Use Sheldon's Fender Nuts to work with recessed brake bolts
- Rust resistant and includes all required brackets and hardware
- Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
$29.99
The Ursus MOOI 90 Adjustable center-mount kickstand is an alloy kickstand and has the capacity to hold up to 55 lbs. The MOOI is ideal for bicycles with a center mount. The adjustable tool-free kickstand features a button that allows you to set the perfect length for your bike. The maximum load capacity is 25 kg and is suitable for bike wheels between 24" and 29".
Features a tool-free adjustment button that lets you adjust the lean angle of your bicycle to your preference. The plastic foot attached to the Mooi kickstand is extremely strong and prevents the stand from slipping while in use. Weighs 250 grams.
$24.99
The Ursus MOOI R90 Adjustable rear-mount integrated kickstand (18 mm PLATE) is an alloy kickstand and has the capacity to hold up to 55 lbs. URSUS MOOI is ideal for bicycles that are compatible with an integrated mount at the rear dropout - 18mm center to center two-bolt mounting. The adjustable tool-free kickstand features a button that allows you to set the perfect length (263mm - 333mm) for your bike.
Intended for bikes with an 18mm integrated mount at the rear dropout.
55 lbs capacity. Made in Italy.
Intended for bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep even the most stubborn bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 24-inch wheels all the way to 29-inch wheels. Compatible with Trek and other bikes designed with direct mount 18mm mounting holes on the rear chainstays.
$24.71
Tri-Flow Foaming Lubricant helps penetrate and protect bearings, chains and cables.
- Foaming action helps cling to vertical or horizontal surfaces
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$8.53 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$15.05 - $33.34
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity
$34.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
$29.95
Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.
Page 1 of 154
Next page