Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$46.00
Zipp Speed Weaponry Cartridge Bearings
$30.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.
$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains. - Cable activated, hydraulic action, infinitely adjustable travel - Double key-way design prevents lateral twisting - Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails - Sealed cartridge internals for quick replacement - Low profile head-seal and saddle clamp increase useable travel
$84.95
The Wolf Tooth 107 BCD Chainring for SRAM Cranks is compatible with most new SRAM 1x road cranks that use the 107 BCD spider, including the SRAM AXS Power Meter Spider. This chainring uses the patented Wolf Tooth Drop-Stop B Wide/Narrow tooth profile that is optimized for drop bar bikes. - Fits 107 BCD for SRAM Cranks - Drop-Stop technology prevents dropped chains. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris while reducing friction. - Cranks that use the 107 BCD spider also use the SRAM 8-bolt interface, which is compatible with Wolf Tooth Direct Mount Chainrings for SRAM 8-Bolt Compatibility: - Fits 107 BCD spiders. - Chainline is determined by the crank model. See manufacturer specs for chainline. - 36t chainring will not work with the 107 BCD Quarq Power Meter - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains
$84.95 - $89.95
These chainrings are for Shimano GRX cranks. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop ST is specifically for the Shimano 12-speed Hyperglide+ chain, which is used by GRX 12-speed. Drop Stop-B works with all other 9, 10, 11, and 12-spd chains, including SRAM Flattop. Compatibility: - Shimano GRX cranksets including RX600 and RX810 - Drop-Stop ST is designed for Shimano 12-speed Hyperglide+ chains - Drop-Stop B tooth profile is compatible with SRAM Flattop chain - Wolf Tooth’s patented Drop-Stop wide/narrow tooth profile provides the ultimate chain retention and mud-shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains
$79.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our Drop-Stop® technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on-road applications with the giant 50t rings. Fits 110 BCD 5 arm cranksets Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings are for use with 110 BCD 5-arm cranksets. - Stock 2x bolts will not work. You will need bolts like our 6mm bolts which are optimized for single ring mounting. - Chainline - varies - these rings can be mounted in either the big or small ring position on a double cranksets. The most common mounting is in the big ring position because of chainstay clearance. The ring centerline is ~2mm from the ring's mounting face so they usually sit about 2mm closer to the frame than the stock big ring (depends on the stock ring) Recommendations - Recommend the use of a clutch-style rear derailleur for the best chain security. - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! - Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 34t/44g | 36t/58g | 38t/66g | 40t/74g | 42t/81g | 44t/90g | 46t/107g | 48t/115g | 50t/125g - Material: 7075-T6 aluminum - Made in the USA
$79.95
Looking for a 1X chainring for your new Shimano XT, SLX or Deore crankset with the proven chain retention of our Drop-Stop® chainrings? Wolf Tooth has what you need in the form of a beautifully machined asymmetrical 96 mm BCD that provides the ideal 1X chainline of 49mm. Note - The 28T and 26T sizes will mount to the inner 64 BCD mounting position on these cranksets. Compatibility: - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC M5100 1x or 2x cranksets - Not compatible with Deore triple (3x) cranksets - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most Boost bikes. See this explanation for details. - Drop-Stop A models will reduce the chainline (inward towards the frame) from the Shimano specified chainline for the crankset: 26T-28T = -3mm, 30T-34T = -2mm, and 36T-38T = -1mm - Drop-Stop ST models will have the same chainline as the Shimano specified chainline - 10mm bolts are optimized for mounting this ring - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 26t/42g | 28t/50g | 30t/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA
$19.95
- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.
$84.95
These chainrings are for Easton or Race Face Cinch cranks. Updated tooth profile works with SRAM Flattop chain. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Compatibility: - Easton Cinch™ cranksets including EC90SL - Works with SRAM Flattop chain - Wolf Tooth's patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 38t/80g | 40t/91g | 42t/96g | 44t/113g | 46t/129g | 48t/139g | 50t/149g - Material: 7075-T6 aluminum - Made in the USA
$76.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$34.95
Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.
$34.95
Mega Fat Paw grips were developed for riders who crave large-diameter grips that also have a soft feel. The 11.5mm grip thickness reduces hand fatigue and finger numbness, making it an ideal option for riders with large or gloved hands. - 40mm installed diameter–handlebar diameter included - 100% proprietary dual-density silicone compound provides excellent vibration damping and conforms to your hand for improved comfort while maintaining durability - Tacky texture provides excellent grip with or without gloves in all weather conditions - Includes bar end plugs
$349.95 - $379.95
The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home. - Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts. - Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents. - Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size. - Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses. - Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.
$39.95
Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - Washable surface is resistant to wear and packing out - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch - Length: 152cm
$39.95
Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch
$29.95
These 6mm long bolts are designed for single chainrings that have non-threaded standoffs. Uses a double hex head interface so you don't have to use a chainring nut spanner. - 6mm length - Made in the US out of 7075-T6 Aluminum - Has hex heads on both the bolt and nut for easy installation - Max torque of 7-8 Nm with light grease on threads only
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push
$15.95
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$14.95
Compression plug for Wolf Tooth headsets. - Compression plug works with steerer tube inner diameters ranging from 23.2mm to 24.2mm
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
The Wolf Tooth Compression Plug provides an anchor point to set the headset preload on road, MTB, or gravel bikes with carbon forks—essentially securing everything on the steerer tube. A stem cap with a 5mm integrated spacer is included, which is important since many fork manufacturers require the steerer tube to extend above the top of the stem. It is available in multiple color options to add some style to your bike. - Fits forks with 1 1/8" steerer tubes - Designed for carbon steerer tubes but works with metal steerer tubes with ID from 23.5mm to 24.5mm - 7075-T6 aluminum - Never use a star nut on forks with carbon steerers
$24.95
Goatlinks are designed to optimize the derailleur's position relative to your cassette. Offered in two versions - a 10-speed and 11-speed, each is intended to improve the shifting of your 1x drivetrain.
$69.95
ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
Page 1 of 310 Next page