Shoes

45NRTH teamed up with Red Wing leather to create a limited edition boot with a heritage look. This boot retains all the technical features of the original Wolvhammer. The Wolvhammer transcends traditional cycling footwear, drawing conceptual inspiration from mountaineering boots. They've removed the outer zipper and Velcro in favor of a lace-up design with a gusseted tongue to keep wet winter weather out and warmth in. The full-grain leather and ballistic nylon shell provides a durable barrier while the waterproof membrane protects your feet from the elements. Aerogel in the foot bed blocks cold cleats from chilling your toes. When the snow gets deep, pair them with Bergraven Gaiters (sold separately) with the dedicated hook in the toe-box.

Added insulation and wind protection. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Reflective accents and logos

Optimal insulation and wind protection for those cold weather rides. Features: - Windproof 3-Layer soft shell construction - Fleece lined for added warmth - Reinforced heel and toe - Fits any cleats - Zippered closure - Reflective accents and logos

Cold feet and soggy socks are things of the past with Bellwether's Aqua-No Booties. Their Aqua-No fabric and seam-sealed construction shuts out precipitation while letting air flow freely. They feature zip closures for easy on and off as well as reflective trim for enhanced visibility. Plus, cleat cutouts and reinforced heels and toes provide durability. Features: - Waterproof and breathable - Seam-sealed construction - Reinforced heel and toe - Fits any cleats - Reflective accents and logos - Zippered closure

Wear down the bottom of your shoes from too much cycling? The Toe and Heel Pad Set includes 4 pieces of rubber for a pair of your favorite Bont shoes along with screws to keep them in place.

Need to replace your buckle? Bont's Slimline Buckle Kit includes a pair of buckles, loop, a pair of 9 cm ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Slimline buckle with a Standard buckle.

Need to replace your buckle? Bont's Standard Buckle Kit includes a pair of buckles, loop, a pair of ladders and screws. Just grab a small screw driver and you can easily replace your current buckles. Please note that you can only replace the buckle on your shoe with the same buckle kit that the shoe came with. You cannot replace a Standard buckle with a Slimline buckle.

Bont's Riot road shoes are heat-moldable for a custom-fit and built to withstand the rigors of everyday cycling. Stiff resin—that is easily moldable at relatively low temperatures—lets you use a conventional oven to fine-tune the snug fit. Your arches, heels, and forefeet are all supported to ensure a neutral position that protects your knees. You'll find a secure fit with the z-form Velco strap and micro-adjustable buckle. Plus, mesh panels and vents along the microfiber side panels keep you cool on the sunny days.

Bont's Riot TR Shoes are heat-moldable for a custom-fit and built to withstand the rigors of triathlons. Stiff resin—that is easily moldable at relatively low temperatures—lets you use a conventional oven to fine-tune the snug fit. Your arches, heels, and forefeet are all supported to ensure a neutral position that protects your knees. The main Velcro straps are notched to stay open for quick transition times. Plus, mesh panels and vents along the microfiber side panels keep your feet dry once you’re out of the water.

The Blitz Road Shoes use Bont's industry-leading anatomical shaping and power transfer system. Combined with their 100% thermo moldable carbon chassis, they create high performance cycling shoes with unparalleled comfort at unbeatable value. Constructed with high grade Microfiber, the Blitzes stand up to the rigors of everyday cycling while mesh inserts assist with breathability. Full 3K carbon construction of the chassis ensures maximum stiffness and efficiency at an incredibly low weight. Bont Cycling's proprietary thermo moldable resin ensures the fit customization of the shoes, while the BOA dial and a forefoot velcro strap ensures micro adjustability of the fit. The Blitz is highly ventilated via integrated top mesh panels and ventilation holes throughout the side microfiber panels.

Handmade, lightweight, and heat-moldable, Bont’s Vaypor XC Mountain Shoes are ready to power down trails. Bumpers in key areas protect your feet while the replaceable tread improves traction and keeps debris from your cleats. Stiff resin—that is easily moldable at relatively low temperatures—lets you use a conventional oven to fine-tune the snug fit. An Anti-Stretch material ensures the Vaypor XCs maintain a supportive structure on the top of the foot to assist in pedaling efficiency. Your arches, heels, and forefeet are also well supported to ensure a neutral position that protects your knees. High density memory foam padding offers comfort while vents improve airflow to keep you cool through hot days and hard efforts. Micro-adjustable buckles and an anatomical shape mean you’re sure to have get a comfortable fit.

From Bont's cycling heritage born on the boards of velodromes, the Vaypor Classic has been created to encapsulate state of the art technology together with the simplicity and elegance of old school lacing in this road cycling shoe. Stiff resin—that is easily moldable at relatively low temperatures—lets you use a conventional oven to fine-tune the snug fit. An Anti-Stretch material ensures the Classics maintain a supportive structure on the top of the foot to assist in pedaling efficiency. Your arches, heels, and forefeet are all supported to ensure a neutral position that protects your knees. High density memory foam padding offers comfort while vents improve airflow to keep you cool through hot days and hard efforts. With their anatomical shape, micro-adjustable buckles, and micro-grids on the soles that help you fine tune your cleat placement, you’re bound to love this fit.

Lighter. Stronger. Faster. Designed for speed and comfort, the Vaypor S once again redefines the standards of pro level road cycling shoes. Bont's latest flagship shoe has been further refined to improve on their already industry leading standards. Whether you are a pro racer or simply a rider who demands the finest, the Vaypor S will provide the most anatomically and biomechanically correct platform with the most efficient power transfer platform currently available. - 100% carbon monocoque chassis utilizing hand-laid unidirectional carbon and Bont's proprietary heat molding technology - Duralite upper & suede leather liner - 3.6mm stack height - Frontal area air vents - Innersole: EVA thermo-moldable - Sole Guards: replaceable heel guard - Padding: memory foam - Fully heat-moldable monocoque chassis - Cleat mounting: 3-hole Look configuration plus mm grid plus grip - Closure System: Dual Dial System with replaceable Kevlar Wiring - Weight: 230 grams (approximate weight based on size 42 shoe)

Cleats with a more forgiving 10-deg release. - Optimized for novice riders or those new to clip-in pedals - 10-deg release angle makes it easier to unclip - 2-hole bolt pattern for mountain bike shoes - Plastic spacing shims included - Compatible with all Crankbrothers clip-in pedals

Endura's FS260-Pro Slick Overshoes are just the thing to bring on rides when it may get cold and wet. Their stretch waterproof construction keeps the rain and wind at bay, while the rear Lycra panels and zip closures provide a perfect fit. And, there are reflective accents for enhanced visibility.

Fend off darkness and soggy feet with Luminite II Overshoes. Crafted from seam-taped, waterproof fabric, these covers feature rugged Kevlar soles at the toe and durable flatlocked seams. They are suitable for all kinds of cycling footwear and cleats because they are fully open at the sole. The back heel features Velco fastenings for an adjustable fit. And, the Luminite II Overshoes are surrounded in 360-degree reflective trim for excellent visibility.

Crafted from tough, waterproof neoprene, Endura's MT500 II Overshoes will keep your feet dry and warm. These booties feature waterproof rear zips and a welded center seam for a snug, smooth fit over your mountain bike shoes. The grooved rubber toe caps help on muddy slopes and steep climbs while the Kevlar soles withstand tough terrain. There are also reflective details for enhanced visibility. Say goodbye to muddy shoes!

Endura's Road II Overshoes are an essential accessory for when the weather calls for rain, wind, and cold. Crafted from smooth neoprene, these water-resistant covers feature rugged Kevlar soles with cleat cutouts. They also have rear zips for a snug fit, durable stitching, reflective accents, and a crank rub protection print.

The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

For optimum power transfer to the bike, leg power needs to be effectively converted into propulsion. The IP3 insoles from Ergon support and stabilize the power transfer from the legs and feet straight to the pedals. Due to the patented stabilization delta, a natural foot position is achieved through three points resulting in an efficient and comfortable motion sequence while pedaling. Made in Germany and developed with insole specialist Solestar.

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair

Exustar Cleats compatible with Look Keo System - Engineering carbon fiber injection body - Weight of 24 grams per cleat - 7-degree floating arc

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat ARCR2, BLKR2 - Also compatible with Look Keo system - Durable and flexible rubber - Weight of only 45 grams/pair

Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with EPS-SL cleats (Shimano SPD-SL-style) - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 86 grams/pair

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float

- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc

This all-round MTB shoe features a contoured, comfortable PU leather upper, with breathable mesh, and a rubber sole. Compatible with clip-in or platform pedals and has a screw-on cleat recess cover. A great shoe for spinning as well. - Upper is a PU leather, breathable mesh, with reflective swatch - Velcro strap and lace-up closure - Rubber sole and fiberglass reinforced nylon midsole - Washable insole made of perforated EVA - Interfaces with platform pedals or Shimano SPD

Product Details Wearing dirty mountain bike shoes to work doesn’t always go over well with your boss and co-workers. For this reason Five Ten created the District. The cycling-specific features include a reflective back tab for night rides, as well as an easily cleanable, weather-resistant leather and synthetic upper to keep your feet clean and dry. The District walks the fine line of being a fashion-forward shoe with technical cycling features. Key Features - Non-marking Marathon rubber outsole - PU-coated leather/synthetic upper - One-piece molded cupsole - Polyester textile lining - Reflective back tab - Weight: 416g each (Size 9US) Good For - Urban commuting

Wearing dirty mountain bike shoes to work doesn’t always go over well with your boss and co-workers. For this reason Five Ten created the District. The cycling-specific features include a reflective back tab for night rides, as well as an easily cleanable, weather-resistant leather and synthetic upper to keep your feet clean and dry. The District walks the fine line of being a fashion-forward shoe with technical cycling features. Key Features - Non-marking Marathon rubber outsole - PU-coated leather/synthetic upper - One-piece molded cupsole - Polyester textile lining - Reflective back tab - Weight: 514g each (Size 9US) Good For - Urban commuting