Helmets

The Nutcase Street Helmet collection combines the industry leading safety feature MIPS with original Nutcase inspiring designs. Featuring an improved retention system to provide a secure, comfortable fit and 2x the reflectivity for visibility on the road. 11 air vents increase the airflow to keep your brain cool and creative designs to keep you looking even cooler. - Equipped with MIPS (Multi-directional Impact Protection System) designed to reduce rotational forces that can result from certain impacts - High performing injection molded ABS shell and tuned EPS foam to keep you safe on the road - Improved ventilation to keep you cool - Premium Fidlock magnetic closure for one handed snap and go buckle - 3 piece internal heat sealed pads to provide next to brain comfort - Simple dial adjustable fit system provides safety, individualized fit and comfort - 2x reflectivity for increased visibility on the road - Eleven vents with internal channels in EPS for ventilation - Visor Included - CPSC 16 CFR 1203 and ASTM F1492 certified for cycling, scooting, and skating

Strap divider for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Strap divider for thin Lazer helmet straps COMPATIBILITY - Bullet 2.0 - G1 MIPS - G1 - Z1 MIPS - Z1 - Century MIPS - Century - Victor - Wasp Air Tri - Impala - ATTACHMENT: strap - WEIGHT: 3g - MATERIAL: Nylon

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Replacement Pads for Lazer's BOB Helmet

Screws for Impala visor. - COMPATIBILITY: Impala MIPS, Impala - WEIGHT: 1g - MATERIAL: Aluminum

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Jackal helmets

Freshen up the interior of your helmet with a new pad set! - Replacement pads for Sphere helmets - Attachment: Velcro - Material: Foam

Screws for Jackal Visor

Replacement Pads for Lazer's O2 and Monroe helmets

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads. - COMPATIBILITY: Bullet, Bullet 2.0 - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Camera mount for Jackal and Impala helmets. - COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala - ATTACHMENT: Velcro - WEIGHT: 13g - MATERIAL: Nylon

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad. - COMPATIBILITY: Cameleon MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Padset details listed below. Replacement padset for Lazer Coyote and Coyote MIPS helmets. Set includes three pads - One front/top pad and two top side pads. - COMPATIBILITY: Coyote MIPS, Coyote - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

Freshen up the interior of your helmet with a new pad set! Replacement padset for Lazer Urbanize MIPS helmets. Set includes two pads - one front pad and one top center pad COMPATIBILITY - Urbanize MIPS - ATTACHMENT: velcro - WEIGHT: 12g - MATERIAL: Foam

- Replacement X-Static pads for Lazer's Wasp Air Helmet - X-Static pads are an anti-microbial, self-cleaning pad system

A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions. The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System. - COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS - BATTERY TYPE: LR41 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: ATS dial - WEIGHT: 15g - MATERIAL: Nylon

A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions LED light for Lazer TSPLUS retention system COMPATIBILITY - Tonic MIPS - Tonic - Tardiz2 - Coyote MIPS - Coyote - Chiru MIPS - Next+ - Compact DLX MIPS - Compact DLX - Compact - BATTERY TYPE: CR2032 button battery - RUN TIME: 37 hours - LUMENS: 4 lumens - ATTACHMENT: TS+ mechanism - WEIGHT: 12g - MATERIAL: LED light

Visor for Coyote helmet COMPATIBILITY - Coyote MIPS - Coyote - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Visor for Impala helmet COMPATIBILITY - Impala MIPS - Impala - ATTACHMENT: Direct Mount - WEIGHT: 45g - MATERIAL: Nylon

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS - ATTACHMENT: Blade or Blade+ helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. Sizing: - Small = 52 – 56cm - Medium = 55 – 59cm - Large = 58 – 61cm

Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets! The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride. - COMPATIBILITY: Z1 MIPS, Z1 - ATTACHMENT: Z1 helmet - WEIGHT: 45g - MATERIAL: Polycarbonate

Keep your favorite little cyclist safe and sound with Lazer's Bob helmet. Featuring Lazer's easy-to-use Comfit3 Retention System and built-in neck reinforcement, it ensures a great fit that can be adjusted in seconds for growing kids. Six vents aid airflow and reflective accents enhance visibility. What's more, the Bob comes in cool styles that little riders love to wear.

The Liv Rev Comp brings the same great benefits of the Liv Rev to all levels of riders. You’ll stay cool and dry with ventilation from the Direct Flow Cooling and moisture-wicking TransTextura PLUS as you grind uphill and hit the flats. Open up on high-speed descents with a perfectly snug fit for zero distractions, thanks to the CINCH Pro head-hugging fit system. Whether you attack during a group ride or hang back to take in the views, Liv Rev Comp has you covered with a stylish design and uncompromising comfort. Liv Rev Comp is available with the latest MIPS technology for maximum crash protection. - AirFlow 14-vent cooling system is enhanced by three large center vents pulling air through the helmet and over the rider’s head to keep them cool - In-mold Polycarbonate (PC) shell with lightweight EPS foam provides maximum protection without being uncomfortable - Lightweight, comfortable LiteForm webbing wraps around the head for a secure and comfortable fit. It’s also hydrophobic so it won’t absorb sweat or stretch out like other webbing - Locking cam buckles keep the LiteForm webbing anchored securely - TransTextura Plus anti-microbial padding helps fight bacteria growth by pulling sweat from a rider’s head and transferring it through the AirFlow vents. The natural property of the fabric inhibits microbes that cause odors - Cinch Pro fit system offers optimal coverage by cradling the occipital bone for full protection, support and comfort - Numen+ Link TL Magnetic mount compatible - MIPS Brain Protection System optimized design - Certifications: CPSC/CE - Small/Medium- 49-57cm; Medium/Large- 53-61cm

A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap. COMPATIBILITY - Cityzen KinetiCore - Jackal KinetiCore - Nutz KinetiCore - Pnut KinetiCore - Strada KinetiCore - Vento KinetiCore - BATTERY TYPE: USB rechargeable - RECHARGE TIME: 2.5 hours - RUN TIME: 54 hours - LUMENS: 40 lumens - ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet. - WEIGHT: 15g

Strap dividers for thick Lazer helmet straps COMPATIBILITY - Blade+ MIPS - Blade+ - Tonic MIPS - Tonic - Coyote MIPS - Coyote - Chiru - Next+ - Cameleon MIPS - Compact DLX MIPS - Compact DLX - Compact - J1 - Gekko MIPS - Gekko - Lil'Gekko MIPS - Lil'Gekko - ATTACHMENT: strap - MATERIAL: Nylon

Lazer's super-stylish Max Plus looks so cool your kid will never want to leave home without it. It sports Lazer's Turnfit system for easy adjustment with a simple twist, and 11 large vents to keep the air flowing. You'll also appreciate the built-in visor for extra sun protection.

Magnetic mount lens for Lazer Bullet 2.0 helmet. The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use. - COMPATIBILITY: Bullet 2.0 - ATTACHMENT: magnetic - WEIGHT: 24g - MATERIAL: Polycarbonate

Designed for the recreational rider, the Compact helmet offers the TS+ Fit System with progressive adjustments, an integrated visor, and 20 airflow vents to keep your head comfortable. All of this comes in a stylish, one size fits all package. A refreshingly lightweight option for the recreational cyclist, the Compact helmet’s in-mold construction also makes it a durable choice. The TS+ Fit System keeps the helmet secure on your head over any bumps in the trail or road. On sunny weekend pedals, the integrated visor will keep you from squinting and the 20 airflow vents will cool you down. For evening rides, reflective details and an optional rechargeable rear TS+ LED light will help keep you visible. The Compact fits everyone, so whether you are sticking to paved paths or venturing onto gravel and dirt trails, this helmet will help protect your head so that you can enjoy your adventure! - One size fits all - Turnfit Plus system - Rear LED light compatible - Available in six colors - Fit System: TS+ Turnfit plus System - Construction: In-Mold - Ventilation: 20 vents - Weight: 325g - Certification: CPSC Features: Rear LED Light compatible This helmet is compatible with the integrated Rear LED Light accessory which improves your visibility from the rear in low light conditions. Turnfit Plus system (TS+) A unique fit system which prevents hotspots or pressure points by making the adjustment around the entire circumference of your head. Unisize One size fits all. The helmet shell and fit system is designed to accommodate a wide variety of head sizes and shapes.